Shop
-
Clothing & Apparel (5)
-
Consumer Electronic (7)
-
Foods & Grocery (14)
-
Health & Beauty (7)
-
Home, Garden & Kitchen (7)
-
IT & Networking (123)
-
Jewelry & Watches (6)
-
Phone, Computer & Accessories (72)
-
Sport & Outdoor (20)
-
Toy Market (1)
-
TP-Link (1)
-
DBC PLC Splitter 1×8
PLC Splitter 1×2 Steel Tube No Connector 0.9mm Cable Diameter Optic Plc Splitter 1260-1610nm
Description
Planar lightwave circuit splitter (PLC Splitter) is a type of optical power management device that is fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON(EPON/GPON) networks to realize optical signal power splitting.
We provides whole series of 1xN and 2xN splitter products that are tailored for specific applications. All PLC Splitter products meet GR-1209-CORE and GR-1221-CORE requirements.
Features
1Low insertion loss and low PDL
2High channel counts
3Exceptional reliability and stability
4Wide operating wavelength
৳ 170.00৳ 180.00 -
DBC PLC Splitter 1×4
PLC Splitter 1×2 Steel Tube No Connector 0.9mm Cable Diameter Optic Plc Splitter 1260-1610nm
Description
Planar lightwave circuit splitter (PLC Splitter) is a type of optical power management device that is fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON(EPON/GPON) networks to realize optical signal power splitting.
We provides whole series of 1xN and 2xN splitter products that are tailored for specific applications. All PLC Splitter products meet GR-1209-CORE and GR-1221-CORE requirements.
Features
1Low insertion loss and low PDL
2High channel counts
3Exceptional reliability and stability
4Wide operating wavelength
৳ 140.00৳ 150.00 -
DBC PLC Splitter 1×2
PLC Splitter 1×2 Steel Tube No Connector 0.9mm Cable Diameter Optic Plc Splitter 1260-1610nm
Description
Planar lightwave circuit splitter (PLC Splitter) is a type of optical power management device that is fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON(EPON/GPON) networks to realize optical signal power splitting.
We provides whole series of 1xN and 2xN splitter products that are tailored for specific applications. All PLC Splitter products meet GR-1209-CORE and GR-1221-CORE requirements.
Features
1Low insertion loss and low PDL
2High channel counts
3Exceptional reliability and stability
4Wide operating wavelength
৳ 120.00৳ 130.00 -
D-Link HTB-1100S 10/100Mbps Media Converter F3
Description
D-Link HTB-1100S Media Converter
The MC D-Link HTB-1100 S/B is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. MC takes only one fiber cable to transmit and receive data, which will save half the cabling cost for you.
Designed for 10/100Base-TX and 100Base-FX standards, the MC D-Link HTB-1100 S/B is designed for use with single-mode fiber cable utilizing the SC-Type connector.
The MC D-Link HTB-1100 S/B supports longwave (LX) laser specification at a full wire-speed forwarding rate.
৳ 1,200.00৳ 1,250.00 -
DBC 8 PORT OLT EPON
DBC 8 PORT OLT
Product Description
8 Port Optical Line Terminal৳ 83,000.00৳ 85,000.00 -
DBC OLT EPON 4 Port
DBC OLT EPON 4 Port
DBC GEPON OLT is 1U height 19 inch rack mount products. The features of the OLT are small, convenient, flexible, easy to deploy, high performance. It is appropriate to be deployed in compact room environment. The OLTs can be used for “Triple-Play”, VPN, IP Camera, Enterprise LAN and ICT applications.
৳ 44,000.00৳ 47,000.00 -
DBC-EDFA 1550nm / 1490nm / 1310nm
DBC-EDFA 1550nm / 1490nm / 1310nm
Description
BC-EDFA optical amplifier adopts reliable, high-quality 980nm and 1480nm pump laser. Upon
special design and exclusive optimization technology, it greatly reduces the signal degradation.
The machine achieves reliable optical amplification through low-noise EDF (Erbium-doped fiber)
and high-efficient circuitry.
Combined with 1550nm optical transmitter, BC-EDFA is widely used in long-distance transmission
among ring network, distribution network and town network.
Features- 1U, 19” standard rack-mount
- World brand laser pumps
- Low noise
- Output power from 13 to 24dBm
- Operational parameters displayed on LCD OF front panel
- Standard RJ45 interfaces; SNMP
৳ 70,000.00৳ 75,000.00 -
D-Link DIR-806IN AC750
D-Link DIR-806IN AC750
Specification:
Key Features Antenna The fixed 3x5dBi dual band antenna Button 1 WPS Button 1 RESET Button Frequency 2.4G: 2.412GHz – 2.484GHz, 5G: 5.170GHz – 5.875GHz Wireless Yes Interface 1 10/100Mbps WAN RJ45 Ports,
4 10/100Mbps LAN RJ45 Ports,
IEEE 802.11a/b/g/n/ac wireless lanNetwork Standard IEEE 802.11a/b/g/n/ac, IEEE 802.3, IEEE 802.3u Encryption 64/128bits WEP; WPA/WPA2 encryption, WPS (Wi-Fi protected setup) Operating System Support Windows 8/7/Vista/XP SP3, or Mac OS X 10.4 or higher, Internet Explorer 7, Firefox 12.0, Chrome 20.0, Safari 4.0 or other Java-enabled browser, Ethernet interface or Wi-Fi, Cable or DSL Modem, Subscription with an Internet Service Provider ৳ 1,850.00৳ 1,900.00 -
D-link DES-1008C 8 Port SWITCH
D-link unmanaged Switch:
The DES-1008C 8 Port 10/100 Mbps Unmanaged Switch is an economical and plug-and-play networking switch solution for small and medium businesses. It enables you to easily expand your network and provide a quick way to upgrade your network.Advanced Features
Auto MDI / MDIX crossover for all ports. It secures a store and forwards switching scheme and Full/half-duplex for Ethernet/Fast Ethernet speeds. This D-Link switch Supports 2,048-byte jumbo frames and backpressure at half-duplex operation, wire-speed reception, and transmission. Works the Store-and-Forward switching method and auto-negotiate for each port. This switch complies with IEEE 802.3 10BASE-T, 802.3u 100BASE-TX, 802.3az, 802.3x, and EEE flow control. Tripleplay Technology BD is the Technology Partner of UCC. This product has one year warranty.৳ 840.00৳ 870.00 -
D-LINK DIR-650IN Wireless N300 Router
Model: DIR-650IN
- WPA/WPA2 & Firewall(NAT) Security
- 4 X 5dBi External Antenna
- Wireless Interface
- Dimension: 255.9 x 168 x 41.2 mm
- Internet connection with wired and wireless devices.
- Advanced Security with WPA/WPA2 and Firewall (NAT)
- Multiple Operating Modes: Router | AP | Repeater | Client | WISP client/Repeater.
- Web browser-based setup and configuration.
৳ 1,400.00৳ 1,680.00 -
D-Link Wireless N300 Router (DIR-615)
D-Link Wireless N300 Router – Model D-Link DIR-615
The D-Link Wireless N300 Router (DIR-615) gives you a reliable and affordable Wi-Fi connection. Share high-speed Internet access with computers, game consoles, and media players from greater distances around a small home or apartment.
- Set up in minutes with the D-Link setup wizard
- IEEE 802.11n/g technology
- Supports wireless encryption using WPA™ or WPA2™
- Fast Ethernet ports (WAN/LAN) to share high-speed Internet access with computers and game
- High-gain antennas to enhance Wi-Fi coverage around your home
- Supports Wi-Fi Protected Setup (WPS)
৳ 1,100.00৳ 1,320.00 -
INNO IFS 55 Fusion Splicer
INNO IFS 55 Fusion Splicer
INNO IFS 55 Fusion Splicer / Fiber Optic Splicing Machine is a Korean brand professional Splicing machine. Now available in Bangladesh.
Features:
- Automated and programmable wind protector
- 6 seconds Splicing Time;14-second automated tube heater
- Fully ruggedized for shock, dust, and moisture,
- Li-Ion battery with 230 splices/shrinks per charge
- 5 mm cleave length for splice on the connector or small package needs
- Sheath clamp or fiber holder operation
- On-board training and support videos
- Internet software upgrades
- Multi-function transit case with integrated workstation
Specification:
Model number Korea IFS-55 Fusion splicer/fiber splicing machine Applicable Fibers Singlemode (G.652 & G.657), Multimode (G.651), DS (G.653), NZDS (G.655),BIF/UBIF(G.657)
Cladding Diameter 80 μm to 150 μm Coating Diameter 100 μm to 1,000 μm Fiber Cleave Length 5 to 16 mm 10-60mm
Typical Average Splice Loss 0.02 dB with SM, 0.01 dB with MM, 0.04 dB with DS, 0.04 dB with NZDS, measured by cut-back method relevant to ITU-T and IEC
standards
Splicing Time SM FAST mode – 6seconds Pyrocondensation Time-14seconds Arc Calibration Method Automatic, real-time and by using results of the previous splice when in AUTO mode, manual arc calibration function available
Splicing Modes 100 preset and user-programmable modes Splice Loss Estimate Based upon dual-camera core alignment data Storage of Splice Result Last 2,000 results to be stored in the internal memory Fiber Display X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation
Magnification X or Y:300 X ;X and Y : 300 X Viewing Method Dual cameras with 4.3 inch TFT color LCD monitor Operating Condition 0 to 5,000 m above sea level, 0 to 95%RH and -10 to 50°C /Max wind velocity of 15M/S Return loss >60dB Pull 1.96-2.25N Electrode life 3000-5000/One pair for Standby application Weight 1.5KG Machine Size 124W*123D*121H(mm) Warranty 2 years warranty and lifespan technology support Splicing cords 260 cords /per charge Splicing Modes
- 100 preset and user-programmable modes
- Splice Loss Estimate
- Based upon dual-camera core alignment data
- Storage of Splice Result
- The last 2,000 results to be stored in the internal memory
- Fiber Display
- X or Y, or both X and Y simultaneously. Front or rear monitor display
- options with automated image orientation
- Magnification
- X or Y:300 X ;X and Y : 300 X
- Viewing Method
- Dual cameras with 4.3 inch TFT color LCD monitor
- Operating Conditon
- 0 to 5,000 m above sea level, 0 to 95%RH and -10 to 50°C /Max wind velocity of 15M/S
- Return loss
- >60dB
- Pull
- 1.96-2.25N
- Electrode life
- 3000-5000/One pair for Standby application
- Weight
- 1.5KG
- Machine Size
- 124W*123D*121H(mm)
- Warranty
- 2 years warranty and lifespan technology support
- Splicing cords
- 260 cords /per charge
Original Korea INNO IFS-55 FTTH Fiber fusion splicer Touch screen IFS-55 Fiber Optic Splicing Machine ARC Multi-function. INNO IFS 55 Fusion Splicer / Fiber Optic Splicing Machine is a Korean brand professional Splicing machine. Now available in Bangladesh.
৳ 145,000.00৳ 150,000.00
