BDCom
-
BDCOM 4PORT EPON OLT P3310D-2AC
BDCOM P3310C-2AC 4 Port OLT Price in Bangladesh.
BDCOM P3310B complies with IEEE802.3ah and P.R.C intercommunication standard, YD/T 1475-2006, supports CTC20/2.1, automatically discovers and cooperates with ONUs of different manufacturers.BDCOM P3310B OLT supports the symmetric uplink/downlink 1.25Gbps PON transmission rate, efficient bandwidth usage and Ethernet services, helping carriers to provide reliable services to their users.
Its coupling ratio, 1:64, and its support of different hybrid ONU networks minimize the carrier’s investment.
BDCOM P3310B, based on the edge-cutting technologies, is strong in functions. A few of its functions such as QoS guarantee, SLA and DBA can be easily listed out.
BDCOM P3310B can support four PON systems and has the following advantages:
EPON: P3310B supports IEEE802.3ah and PRC Community Industry Standard (YD/T 1475-2006). It adopts the point-to-multipoint network topology, effectively collects separate Ethernet services and aggregates them on the MAN node. It connects the upper-layer devices through the GE interface and can be connected to the existing network smoothly.
The Dynamic Bandwidth Allocation (DBA) mechanism enables all users to share the 1Gbps bandwidth reasonably, guaranteeing a reliable QoS.
System’s capacity: The modularized PON card of BDCOM P3310B can support four EPON systems simultaneously, up to 256 ONUs and the 1/64 coupling ratio.
Uplink interface: Its flexible design supports various MAN interface type groups. The optical ports or the electrical ports are selected according to network conditions.
৳ 48,000.00৳ 50,500.00 -
BDCOM P3608-2TE-1AC EPOM OLT 8 PORT
BDCOM P3608-2TE-1AC OLT
Maximum coupling ratio, 1:64
128G Backplane Bandwidth
Volume of the MAC table: 32K
Ports 8 EPON ports
8 GE ports (4 GE optical ports and 4 GE TX/SFP ports)
Optional 2 10G ports
EPON A 1Gbps transmission rate with downlink and uplink symmetry
Average emitting power of the PON port: +2dbm to +7dbm
Light reception sensitivity of the PON port: no less than -30dBm
Security: ONU authentication mechanism
Standard IEEE802.3ah
IEEE 802.1D, Spanning Tree
IEEE 802.1Q, VLAN
IEEE 802.1w, RSTP
IEEE 802.3ad, LACP
Ethernet – II
QoS Backpressure flow control (half duplex)
IEEE 802.3x flow control (full duplex)
IEEE 802.1p, CoS
WR, SP and FIFO
ONU-based uplink/downlink rate limit
DBA and SLA
VLAN Port-based VLAN
4K active VLANs
QinQ and flexible QinQ
IP routing Static route, RIPv1/v2, OSPF, etc.
Routing table: 12K
Multicast IGMP v1/2/3
IGMP Snooping
Reliability Unidirectional Link Detection (UDLD)
Optical path protection of EPON
Network security MAC limit
Port isolation
Storm control
Flow-based ACL
Transmission data encryption on the PON interface
Management CLI, SNMP and TELNET
TFTP and FTP
Chassis 442.5mm(W) x300mm(D) x 44mm(H)
Installation: A 19-inch cabinet
Weight: 2kg
Environment Working condition: 0℃-55℃; 10%-85% non-condensing
Storage condition: -40℃-80℃; 5%-95% non-condensing
Power Input voltage: AC90 to 264V，DC -36 to -72V
Dual power inputs, AC/DC power hybrid, power module’s hot swap
Over-current protection and over-voltage protectionOne year Warranty.
৳ 88,000.00৳ 89,500.00 -
C DATA ONU EPON
C DATA ONU
C-Data EPONN optical network unit design to meet the requirement of the broadband access network. It applies to FTTH/FTTO to provide the data and video service based on the EPON network.
1GE EPON ONU is based on a ZTE high-performance xPON access chip. The chip supposes three mode：EPON/P2P, comply with the GPON standard of g.984, g.983, have good xPON interoperability compatibility.
1GE EPON ONU provides one GE auto-adapting Ethernet ports. Its features high-performance forwarding capabilities to ensure an excellent experience with Internet and HD video services. Therefore, the FD600-521G-HZ630 provides a perfect terminal solution and future-oriented service supporting capabilities for FTTH deployment. It has good third-party compatibility to work with the third-party OLT, such as Huawei/ZTE/Fibroma/Alcatel·Lucent.
৳ 1,100.00৳ 1,200.00 -
C DATA ONU EPON
C DATA ONU
C-Data ONU EPONN optical network unit design to meet the requirement of the broadband access network. It applies to FTTH/FTTO to provide the data and video service based on the EPON network.
1GE EPON ONU is based on a ZTE high-performance xPON access chip. The chip supposes three mode：EPON/P2P, comply with the GPON standard of g.984, g.983, have good xPON interoperability compatibility.
1GE EPON ONU provides one GE auto-adapting Ethernet ports. Its features high-performance forwarding capabilities to ensure an excellent experience with Internet and HD video services. Therefore, the FD600-521G-HZ630 provides a perfect terminal solution and future-oriented service supporting capabilities for FTTH deployment. It has good third-party compatibility to work with the third-party OLT, such as Huawei/ZTE/Fibroma/Alcatel·Lucent.
৳ 1,100.00৳ 1,200.00 -
INNO IFS 55 Fusion Splicer
INNO IFS 55 Fusion Splicer
INNO IFS 55 Fusion Splicer / Fiber Optic Splicing Machine is a Korean brand professional Splicing machine. Now available in Bangladesh.
Features:
- Automated and programmable wind protector
- 6 seconds Splicing Time;14-second automated tube heater
- Fully ruggedized for shock, dust, and moisture,
- Li-Ion battery with 230 splices/shrinks per charge
- 5 mm cleave length for splice on the connector or small package needs
- Sheath clamp or fiber holder operation
- On-board training and support videos
- Internet software upgrades
- Multi-function transit case with integrated workstation
Specification:Â
Model number Korea IFS-55 Fusion splicer/fiber splicing machine Applicable Fibers Singlemode (G.652 & G.657), Multimode (G.651), DS (G.653), NZDS (G.655),BIF/UBIF(G.657)
Cladding Diameter 80 μm to 150 μm Coating Diameter 100 μm to 1,000 μm Fiber Cleave Length 5 to 16 mm 10-60mm
Typical Average Splice Loss 0.02 dB with SM, 0.01 dB with MM, 0.04 dB with DS, 0.04 dB with NZDS, measured by cut-back method relevant to ITU-T and IEC
standards
Splicing Time  SM FAST mode –  6seconds  Pyrocondensation Time-14seconds Arc Calibration Method Automatic, real-time and by using results of the previous splice when in AUTO mode, manual arc calibration function available
Splicing Modes 100 preset and user-programmable modes Splice Loss Estimate Based upon dual-camera core alignment data Storage of Splice Result Last 2,000 results to be stored in the internal memory Fiber Display X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation
Magnification X or Y:300 X ;X and Y : 300 X Viewing Method Dual cameras with 4.3 inch TFT color LCD monitor Operating Condition 0 to 5,000 m above sea level, 0 to 95%RH and -10 to 50°C /Max wind velocity of 15M/S Return loss >60dB Pull 1.96-2.25N Electrode life 3000-5000/One pair for Standby application Weight 1.5KG Machine Size 124W*123D*121H(mm) Warranty 2 years warranty and lifespan technology support Splicing cords 260 cords /per charge Splicing Modes
- 100 preset and user-programmable modes
- Splice Loss Estimate
- Based upon dual-camera core alignment data
- Storage of Splice Result
- The last 2,000 results to be stored in the internal memory
- Fiber Display
- X or Y, or both X and Y simultaneously. Front or rear monitor display
- options with automated image orientation
- Magnification
- X or Y:300 X ;X and Y : 300 X
- Viewing Method
- Dual cameras with 4.3 inch TFT color LCD monitor
- Operating Conditon
- 0 to 5,000 m above sea level, 0 to 95%RH and -10 to 50°C /Max wind velocity of 15M/S
- Return loss
- >60dB
- Pull
- 1.96-2.25N
- Electrode life
- 3000-5000/One pair for Standby application
- Weight
- 1.5KG
- Machine Size
- 124W*123D*121H(mm)
- Warranty
- 2 years warranty and lifespan technology support
- Splicing cords
- 260 cords /per charge
Original Korea INNO IFS-55 FTTH Fiber fusion splicer Touch screen IFS-55 Fiber Optic Splicing Machine ARC Multi-function. INNO IFS 55 Fusion Splicer / Fiber Optic Splicing Machine is a Korean brand professional Splicing machine. Now available in Bangladesh.
৳ 145,000.00৳ 150,000.00 -
INNO View 3 splicing machine
Active V-groove clad alignment splicing method, highest magnification and resolution, color LCD touch screen, user-friendly smart GUI, detachable SOC holder and heating oven, high capacity battery, 3 bright LED and Illuminated keypads, ceramic clamp, harsh weather conditions adaptability.
৳ 225,000.00৳ 230,000.00 -
INNO-ifs-15 Splicing Machine
INNO-ifs-15 Splicing Machine
Return loss: >60db
size: 168x145x160mm
Splice time: 9s
Protection sleeve: 60mm,40mm
Product description: INNO IFS-15 Fiber Fusion Splicer/ Fiber Optic Splicing Machine৳ 140,000.00৳ 145,000.00 -
V-SOL ONU
V-SOL ONU
Description
V-Sol V2801SE is 1GE secure ONU designed for fulfilling FTTH ultra-broadband access request of home and SOHO users. It is based on the stable and mature EPON technology, which has high performance ratio, and the technology of layer 3 ethernet switch. It is easy to maintain, with dual mode, industrial design and powerful firewall.
৳ 1,150.00৳ 1,200.00
