C DATA
-
C DATA ONU EPON
C DATA ONU
C-Data EPONN optical network unit design to meet the requirement of the broadband access network. It applies to FTTH/FTTO to provide the data and video service based on the EPON network.
1GE EPON ONU is based on a ZTE high-performance xPON access chip. The chip supposes three mode：EPON/P2P, comply with the GPON standard of g.984, g.983, have good xPON interoperability compatibility.
1GE EPON ONU provides one GE auto-adapting Ethernet ports. Its features high-performance forwarding capabilities to ensure an excellent experience with Internet and HD video services. Therefore, the FD600-521G-HZ630 provides a perfect terminal solution and future-oriented service supporting capabilities for FTTH deployment. It has good third-party compatibility to work with the third-party OLT, such as Huawei/ZTE/Fibroma/Alcatel·Lucent.
৳ 1,100.00৳ 1,200.00 -
C DATA ONU EPON
C DATA ONU
C-Data ONU EPONN optical network unit design to meet the requirement of the broadband access network. It applies to FTTH/FTTO to provide the data and video service based on the EPON network.
1GE EPON ONU is based on a ZTE high-performance xPON access chip. The chip supposes three mode：EPON/P2P, comply with the GPON standard of g.984, g.983, have good xPON interoperability compatibility.
1GE EPON ONU provides one GE auto-adapting Ethernet ports. Its features high-performance forwarding capabilities to ensure an excellent experience with Internet and HD video services. Therefore, the FD600-521G-HZ630 provides a perfect terminal solution and future-oriented service supporting capabilities for FTTH deployment. It has good third-party compatibility to work with the third-party OLT, such as Huawei/ZTE/Fibroma/Alcatel·Lucent.
৳ 1,100.00৳ 1,200.00 -
D-link DES-1008C 8 Port SWITCH
D-link unmanaged Switch:
The DES-1008C 8 Port 10/100 Mbps Unmanaged Switch is an economical and plug-and-play networking switch solution for small and medium businesses. It enables you to easily expand your network and provide a quick way to upgrade your network.Advanced Features
Auto MDI / MDIX crossover for all ports. It secures a store and forwards switching scheme and Full/half-duplex for Ethernet/Fast Ethernet speeds. This D-Link switch Supports 2,048-byte jumbo frames and backpressure at half-duplex operation, wire-speed reception, and transmission. Works the Store-and-Forward switching method and auto-negotiate for each port. This switch complies with IEEE 802.3 10BASE-T, 802.3u 100BASE-TX, 802.3az, 802.3x, and EEE flow control. Tripleplay Technology BD is the Technology Partner of UCC. This product has one year warranty.৳ 840.00৳ 870.00 -
D-LINK DIR-650IN Wireless N300 Router
Model: DIR-650IN
- WPA/WPA2 & Firewall(NAT) Security
- 4 X 5dBi External Antenna
- Wireless Interface
- Dimension: 255.9 x 168 x 41.2 mm
- Internet connection with wired and wireless devices.
- Advanced Security with WPA/WPA2 and Firewall (NAT)
- Multiple Operating Modes: Router | AP | Repeater | Client | WISP client/Repeater.
- Web browser-based setup and configuration.
৳ 1,400.00৳ 1,680.00 -
D-Link DIR-806IN AC750
D-Link DIR-806IN AC750
Specification:
Key Features Antenna The fixed 3x5dBi dual band antenna Button 1 WPS Button 1 RESET Button Frequency 2.4G: 2.412GHz – 2.484GHz, 5G: 5.170GHz – 5.875GHz Wireless Yes Interface 1 10/100Mbps WAN RJ45 Ports,
4 10/100Mbps LAN RJ45 Ports,
IEEE 802.11a/b/g/n/ac wireless lanNetwork Standard IEEE 802.11a/b/g/n/ac, IEEE 802.3, IEEE 802.3u Encryption 64/128bits WEP; WPA/WPA2 encryption, WPS (Wi-Fi protected setup) Operating System Support Windows 8/7/Vista/XP SP3, or Mac OS X 10.4 or higher, Internet Explorer 7, Firefox 12.0, Chrome 20.0, Safari 4.0 or other Java-enabled browser, Ethernet interface or Wi-Fi, Cable or DSL Modem, Subscription with an Internet Service Provider ৳ 1,850.00৳ 1,900.00 -
D-Link HTB-1100S 10/100Mbps Media Converter F3
Description
D-Link HTB-1100S Media Converter
The MC D-Link HTB-1100 S/B is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. MC takes only one fiber cable to transmit and receive data, which will save half the cabling cost for you.
Designed for 10/100Base-TX and 100Base-FX standards, the MC D-Link HTB-1100 S/B is designed for use with single-mode fiber cable utilizing the SC-Type connector.
The MC D-Link HTB-1100 S/B supports longwave (LX) laser specification at a full wire-speed forwarding rate.
৳ 1,200.00৳ 1,250.00 -
D-Link HTB-1100S 10/100Mbps Media Converter F3
Description
D-Link HTB-1100S Media Converter
The MC D-Link HTB-1100 S/B is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. MC takes only one fiber cable to transmit and receive data, which will save half the cabling cost for you.
Designed for 10/100Base-TX and 100Base-FX standards, the MC D-Link HTB-1100 S/B is designed for use with single-mode fiber cable utilizing the SC-Type connector.
The MC D-Link HTB-1100 S/B supports longwave (LX) laser specification at a full wire-speed forwarding rate.
৳ 1,200.00৳ 1,250.00 -
D-Link Wireless N300 Router (DIR-615)
D-Link Wireless N300 Router – Model D-Link DIR-615
The D-Link Wireless N300 Router (DIR-615) gives you a reliable and affordable Wi-Fi connection. Share high-speed Internet access with computers, game consoles, and media players from greater distances around a small home or apartment.
- Set up in minutes with the D-Link setup wizard
- IEEE 802.11n/g technology
- Supports wireless encryption using WPAâ„¢ or WPA2â„¢
- Fast Ethernet ports (WAN/LAN) to share high-speed Internet access with computers and game
- High-gain antennas to enhance Wi-Fi coverage around your home
- Supports Wi-Fi Protected Setup (WPS)
৳ 1,100.00৳ 1,320.00 -
INNO IFS 55 Fusion Splicer
INNO IFS 55 Fusion Splicer
INNO IFS 55 Fusion Splicer / Fiber Optic Splicing Machine is a Korean brand professional Splicing machine. Now available in Bangladesh.
Features:
- Automated and programmable wind protector
- 6 seconds Splicing Time;14-second automated tube heater
- Fully ruggedized for shock, dust, and moisture,
- Li-Ion battery with 230 splices/shrinks per charge
- 5 mm cleave length for splice on the connector or small package needs
- Sheath clamp or fiber holder operation
- On-board training and support videos
- Internet software upgrades
- Multi-function transit case with integrated workstation
Specification:Â
Model number Korea IFS-55 Fusion splicer/fiber splicing machine Applicable Fibers Singlemode (G.652 & G.657), Multimode (G.651), DS (G.653), NZDS (G.655),BIF/UBIF(G.657)
Cladding Diameter 80 μm to 150 μm Coating Diameter 100 μm to 1,000 μm Fiber Cleave Length 5 to 16 mm 10-60mm
Typical Average Splice Loss 0.02 dB with SM, 0.01 dB with MM, 0.04 dB with DS, 0.04 dB with NZDS, measured by cut-back method relevant to ITU-T and IEC
standards
Splicing Time  SM FAST mode –  6seconds  Pyrocondensation Time-14seconds Arc Calibration Method Automatic, real-time and by using results of the previous splice when in AUTO mode, manual arc calibration function available
Splicing Modes 100 preset and user-programmable modes Splice Loss Estimate Based upon dual-camera core alignment data Storage of Splice Result Last 2,000 results to be stored in the internal memory Fiber Display X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation
Magnification X or Y:300 X ;X and Y : 300 X Viewing Method Dual cameras with 4.3 inch TFT color LCD monitor Operating Condition 0 to 5,000 m above sea level, 0 to 95%RH and -10 to 50°C /Max wind velocity of 15M/S Return loss >60dB Pull 1.96-2.25N Electrode life 3000-5000/One pair for Standby application Weight 1.5KG Machine Size 124W*123D*121H(mm) Warranty 2 years warranty and lifespan technology support Splicing cords 260 cords /per charge Splicing Modes
- 100 preset and user-programmable modes
- Splice Loss Estimate
- Based upon dual-camera core alignment data
- Storage of Splice Result
- The last 2,000 results to be stored in the internal memory
- Fiber Display
- X or Y, or both X and Y simultaneously. Front or rear monitor display
- options with automated image orientation
- Magnification
- X or Y:300 X ;X and Y : 300 X
- Viewing Method
- Dual cameras with 4.3 inch TFT color LCD monitor
- Operating Conditon
- 0 to 5,000 m above sea level, 0 to 95%RH and -10 to 50°C /Max wind velocity of 15M/S
- Return loss
- >60dB
- Pull
- 1.96-2.25N
- Electrode life
- 3000-5000/One pair for Standby application
- Weight
- 1.5KG
- Machine Size
- 124W*123D*121H(mm)
- Warranty
- 2 years warranty and lifespan technology support
- Splicing cords
- 260 cords /per charge
Original Korea INNO IFS-55 FTTH Fiber fusion splicer Touch screen IFS-55 Fiber Optic Splicing Machine ARC Multi-function. INNO IFS 55 Fusion Splicer / Fiber Optic Splicing Machine is a Korean brand professional Splicing machine. Now available in Bangladesh.
৳ 145,000.00৳ 150,000.00 -
INNO View 3 splicing machine
Active V-groove clad alignment splicing method, highest magnification and resolution, color LCD touch screen, user-friendly smart GUI, detachable SOC holder and heating oven, high capacity battery, 3 bright LED and Illuminated keypads, ceramic clamp, harsh weather conditions adaptability.
৳ 225,000.00৳ 230,000.00 -
INNO-ifs-15 Splicing Machine
INNO-ifs-15 Splicing Machine
Return loss: >60db
size: 168x145x160mm
Splice time: 9s
Protection sleeve: 60mm,40mm
Product description: INNO IFS-15 Fiber Fusion Splicer/ Fiber Optic Splicing Machine৳ 140,000.00৳ 145,000.00 -
SEIKO FIER -S6 SPLICE MACHINE
SEIKO FIER -S6 SPLICE MACHINE
Core to core digital alignment
6s for splicing, 18s for tube-heating.
4.3-inch touch screen, small size, easy to carry.
Three-in-one fiber fixture, suitable for all types of optic fibers.
High-power dual-LED light, convenient for night construction.
5200mAh removable lithium battery, 280 cycles splicing and heating.
ARC calibrated by temperature and air pressure automatically
No mirror design, reducing maintenance workload.
Apply to high & low temperature, high altitude and harsh environment.
Specifications
Fiber count Single
Applicable fiber SM (G.652), MM (G.651), DS (G.653), NZDS (G.655), others (like G.657)
Splicing loss 0.02dB (SM), 0.01dB (MM), 0.04dB (DS), 0.04dB (NZDS)
Return loss >60dB
Operate mode Manual, Auto
Fiber alignment Core to core alignment
Splicing time Typical 6s
Heating time Typical 18s
Heat shrinkable tube 60mm, 40mm
Fiber cleaved length 8-16mm
Fiber view magnification 350X (X or Y view), 150X (X and Y view)
Display 4.3-inch touch-screen LCD
Tension test 2N
Battery capacity 5200mAh removable inner Li-battery, 280 cycles splicing and heating after one-fully charged.
Electrode life Around 5000 ARC discharges
Interface USB for data download and software update
Night construction Built-in high-power dual-LED lights
Power supply Adaptor, input: AC100-240V, output: DC13.5V/4.8A.
Operation condition Temperature: -15-50ºC, humidity: <95%RH (no condensation)
Working altitude: 0-5000m. Resist max. wind speed: ≤15m/s
Weight 1.95 kg (including battery)
Dimension 130mm(L)×154mm(W)×132mm(H)
Standard Package
No Items Qty
1 Fusion splicer 1
2 Fiber cleaver 1
3 Fiber stripper 1
4 Drop cable stripper 1
5 AC adaptor 1
6 P.S cord 1
7 Spare electrodes 1 pair
8 Cooling tray 1
9 Manual (CD) 1
10 Carrying case 1
11 Calibration certificate 1৳ 85,000.00৳ 90,000.00
