ADP
-
INNO IFS 55 Fusion Splicer
INNO IFS 55 Fusion Splicer
INNO IFS 55 Fusion Splicer / Fiber Optic Splicing Machine is a Korean brand professional Splicing machine. Now available in Bangladesh.
Features:
- Automated and programmable wind protector
- 6 seconds Splicing Time;14-second automated tube heater
- Fully ruggedized for shock, dust, and moisture,
- Li-Ion battery with 230 splices/shrinks per charge
- 5 mm cleave length for splice on the connector or small package needs
- Sheath clamp or fiber holder operation
- On-board training and support videos
- Internet software upgrades
- Multi-function transit case with integrated workstation
Specification:Â
Model number Korea IFS-55 Fusion splicer/fiber splicing machine Applicable Fibers Singlemode (G.652 & G.657), Multimode (G.651), DS (G.653), NZDS (G.655),BIF/UBIF(G.657)
Cladding Diameter 80 μm to 150 μm Coating Diameter 100 μm to 1,000 μm Fiber Cleave Length 5 to 16 mm 10-60mm
Typical Average Splice Loss 0.02 dB with SM, 0.01 dB with MM, 0.04 dB with DS, 0.04 dB with NZDS, measured by cut-back method relevant to ITU-T and IEC
standards
Splicing Time  SM FAST mode –  6seconds  Pyrocondensation Time-14seconds Arc Calibration Method Automatic, real-time and by using results of the previous splice when in AUTO mode, manual arc calibration function available
Splicing Modes 100 preset and user-programmable modes Splice Loss Estimate Based upon dual-camera core alignment data Storage of Splice Result Last 2,000 results to be stored in the internal memory Fiber Display X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation
Magnification X or Y:300 X ;X and Y : 300 X Viewing Method Dual cameras with 4.3 inch TFT color LCD monitor Operating Condition 0 to 5,000 m above sea level, 0 to 95%RH and -10 to 50°C /Max wind velocity of 15M/S Return loss >60dB Pull 1.96-2.25N Electrode life 3000-5000/One pair for Standby application Weight 1.5KG Machine Size 124W*123D*121H(mm) Warranty 2 years warranty and lifespan technology support Splicing cords 260 cords /per charge Splicing Modes
- 100 preset and user-programmable modes
- Splice Loss Estimate
- Based upon dual-camera core alignment data
- Storage of Splice Result
- The last 2,000 results to be stored in the internal memory
- Fiber Display
- X or Y, or both X and Y simultaneously. Front or rear monitor display
- options with automated image orientation
- Magnification
- X or Y:300 X ;X and Y : 300 X
- Viewing Method
- Dual cameras with 4.3 inch TFT color LCD monitor
- Operating Conditon
- 0 to 5,000 m above sea level, 0 to 95%RH and -10 to 50°C /Max wind velocity of 15M/S
- Return loss
- >60dB
- Pull
- 1.96-2.25N
- Electrode life
- 3000-5000/One pair for Standby application
- Weight
- 1.5KG
- Machine Size
- 124W*123D*121H(mm)
- Warranty
- 2 years warranty and lifespan technology support
- Splicing cords
- 260 cords /per charge
Original Korea INNO IFS-55 FTTH Fiber fusion splicer Touch screen IFS-55 Fiber Optic Splicing Machine ARC Multi-function. INNO IFS 55 Fusion Splicer / Fiber Optic Splicing Machine is a Korean brand professional Splicing machine. Now available in Bangladesh.
৳ 145,000.00৳ 150,000.00 -
INNO View 3 splicing machine
Active V-groove clad alignment splicing method, highest magnification and resolution, color LCD touch screen, user-friendly smart GUI, detachable SOC holder and heating oven, high capacity battery, 3 bright LED and Illuminated keypads, ceramic clamp, harsh weather conditions adaptability.
৳ 225,000.00৳ 230,000.00 -
INNO-ifs-15 Splicing Machine
INNO-ifs-15 Splicing Machine
Return loss: >60db
size: 168x145x160mm
Splice time: 9s
Protection sleeve: 60mm,40mm
Product description: INNO IFS-15 Fiber Fusion Splicer/ Fiber Optic Splicing Machine৳ 140,000.00৳ 145,000.00 -
ONU EPON OFS GL COM Cortina
ONU EPON OFS GL COM Cortina
ONU EPON OFS Cortina 1GE Epon onu (Cortina chipset) (Product of GL-COM)
* 1 PON port (1.25G)
* 1 10/100/1000M port
sfp inside with Cortina chipset৳ 850.00৳ 900.00 -
ONU GPON GL-COM
ONU GPON GL-COM
G8010U-R is GPON ONT designed for fulfilling FTTH ultra-broadband access requests of home and SOHO users. It is based on the stable and mature GPON technology, which has a high performance/price ratio, and the technology of layer 2 Ethernet switch as well. It is highly reliable and easy to maintain, with guaranteed QoS, and fully compliant to ITU-T G.984 GPON standards.
৳ 925.00৳ 950.00 -
Shinho A3 Splicer
Shinho A3 Splicer
Features:
High precision PASÂ alignment system
*Splicing time 6 sec., heating time 30Â sec.
*Fast boot technology
*More than 240 times splicing and heating
*Resist dust, rain, wind, and shock
*Fiber type identify, AUTO splicing mode
*Easy to change electrodes and fiber holder
*High speed USB, maintenance via the Internet
৳ 80,000.00৳ 90,000.00 -
SHINHO Fusion Splicer X-97
SHINHO Fusion Splicer X-97
- Handheld, Small, Light
- Industrial standard screen
- Core to core digital alignment
- 8s splicing stime, 26s tube heating time
- 5800mAh and pluggable Li-battery, Typical 200 cycles
- ARC calibrated by temperature and air pressure automatically
৳ 82,000.00৳ 90,000.00 -
SHINHO Fusion Splicer X-97
SHINHO Fusion Splicer X-97
- Handheld, Small, Light
- Industrial standard screen
- Core to core digital alignment
- 8s splicing stime, 26s tube heating time
- 5800mAh and pluggable Li-battery, Typical 200 cycles
- ARC calibrated by temperature and air pressure automatically
৳ 82,500.00৳ 90,000.00 -
Shinho X-800 Fusion Splice
*6s typically for splicing and 26s for heating,
*Fiber core max. magnifications up to 250X,
*Electrodes discharging more than 4000 times,
*Integrated heater,easy and convenient to operate,
*USB port for software updating and data records exporting,
*PAS image digital processing system, core to core alignment,
*ARC calibrated by temperature and air pressure automatically,
*360° rubber armor protects machine from shock, water and dust,
*5800mAh and pluggable Li-battery,typical 200 cycles splicing and heating,
*Multi-function holder clamps, suitable for bare fibers, drop cables, patch cords etc.X-800 Fusion Splcier Data Sheet
Applicable fiber SM(G.652), MM(G.651), DS(G.653), NZDS(G.655), others(including G.657)
Fiber count Single
Applicable fiber dimensions Cladding diameter: 80 -150μm, Coating diameter: 160 -900μm
Typical splice loss 0.02dB(SM), 0.01dB(MM), 0.04dB(DS), 0.04dB(NZDS)
Return loss >60db
Fiber cleaved length 10-16mm (coating diameter< 250μm ), 16mm(coating diameter: 250-1000μm )
Splicing program 40 groups
Operate mode Manual, Automatic
Auto-heating Available
Typical splicing time 8 seconds
Tube heating time 26 seconds for 60mm and 40mm shrinkable sleeves
Fiber view magnification 250X(X or Y view), 125X(X and Y view)
Viewing method and display 2 CMOS cameras, 4.3 inch color LCD monitor
Storage of splice result 4000 results
Loss evaluation Available
Tension test 1.8-2.2N
Interface GUI menu interface, easier operation
Battery capacity 5800mAh, typical 180 cycles(splice and tube heat), pluggable inner Li-battery
Power supply Adaptor, input: AC100-240V(50/60HZ)
Electrode life More than 4000 ARC discharges, can be replaced conveniently
Terminals USB 2.0 port, for uploading splice results and upgrading software
Operating condition Altitude: 0-5000m, Humidity: 0-95%, Temperature: -10ºC~+50ºC;Wind speed: max 15m/s
Dimension 149mm(L)x120mm(W)x127mm(H)
Weight 1.9kg including battery৳ 95,000.00৳ 100,000.00 -
SHINHO X-86 SPLICE MACHINE
SHINHO X-86 SPLICE MACHINE
Metro style GUI, easy operation;
High definition 5.7′ colorful LCD;
USB port for software upgrading;
8s typically for splicing and 28s for heating;
Up to 4000 groups of records can be stored;
PAS technology, core to core digital alignment;
Intelligent operation, auto heating and splicing;
Rubber armor protects machine from shock or impact;
8800mAh and removable Li-battery, Typical 250 cycles;
Various display groups, max. Magnifications up to 300X;
ARC calibrated by temperature and air pressure automatically;
৳ 135,000.00৳ 140,000.00 -
SHINHO X-86H SPLICE MACHINE
SHINHO X-86H SPLICE MACHINE
Applicable fiber SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T
G.655), others(including G.657)Cladding diameter 80 -150μm
Coating diameter 160 – 900μm
Typical splice loss SM 0.02dB, MM 0.01dB, DS 0.04dB, NZDS 0.04dB
Return loss <60dB
Cleaved length 10~16mm ( Diameter of coating < 250μm ) ; 16mm ( Diameter of coating
250~1000μm )Splicing program 40 groups
Operate mode Manual, Automatic
Auto-Heat Available
Typical splicing time 8 seconds
Heating time 26 seconds for 60mm, 40mm shrinkable sleeve
Magnification 300 times for single display, 150 times for double display
Photoelectric system Two high sensitive cameras, 5.7′ 640×480 colorful LCD
Splicing data record Storing up to 4000 groups of records
Loss evaluation Available
Tension test 1.8~2.2N
Interface GUI menu interface, easy operation
Battery capacity 5800mAh, 250 times fusion and heating, pluggable, real-time power monitor
Power supply Adaptor, input: AC 100-240V ( 50/60HZ ) , output: DC 11~13.5V
Electrodes lifetime More than 4000 times splicing, electrodes can be replaced conveniently
External port USB2.0 port, used to derive splicing record data, software upgrade
Operate environment Altitude: 0~5000m; Relative humidity: 0~95%; Temperature: -10ºC~+50ºC;
Wind speed: max 15m/sVolume/Weight 160mm(L)×150mm(W)×145mm(H) / 2.75kg (including battery)
৳ 140,000.00৳ 145,000.00 -
Shinho X-900 Fiber Splicer
Shinho X-900 Fiber Splicer
6 motors accurate core to core alignment, can detect automatic fiber, 6-second stable splicing and 18-second fast heating, automatic & real-time ARC calibration. The exact time of heating can be observed in temperature, GUI menu interface, 5200mAh Li-battery, 2 CMOS cameras, 5.0-inch color LCD monitor, anti-shock and anti-dust and waterproof, apply to bare fibers / drop cables and patch cords, 160 x 136 x 140mm dimension.
৳ 120,000.00৳ 125,000.00
