Shop
-
Tenda F3 Wifi Router
Tenda F3 Wifi Router 300mbps 3 Antennas (3x5dBi) Router
•Input Type RJ-45 (Ethernet Cable) supported by neighborhood cable broadband ISPs such as Hathway, ACT, Tikona, Airtel Fibrenet, MyWorld, Nextra, Siti Cable, You Broadband, Spectranet etc.
•This Router Does Not Include Modem and works well with Cable Broadbands
•Power Consumption: 1.9W at no load and 3.3W at full-load
•Buttons: 1 x WPS/reset
•LED for system, Wi-Fi, LAN, WAN and WPS
•Interface: 1 x 10/100M auto-negotiation WAN port, 3 x 10/100M auto-negotiation LAN ports
•Safety: WPA AES, TKIP, TKIP and AES
•Wireless Access Control: MAC address filtering
•DHCP Server: Support, Certification: CE ROHS 3C EAC NOM IC
•System Tool: Network time, system upgrade, backup/restore, factory default, login password, system logs, restart
•Speed: 300mbps over 2.4GHz band
•WiFi coverage of up to 200meters
•Three external antennas boost Wi-Fi throughout your house to enjoy ultimate surfing fun
•F3 helps you keep mobile devices, media players and computers connected to Wi-Fi with a reliable connection and expanded coverage in each corner of your house
•You no longer need to worry about the Wi-Fi dead zones
•Antenna: 3x5dBi external un-detachable antennas01 Year Warranty
৳ 1,050.00৳ 1,200.00 -
xPON GPON/EPON ONU Small
Functional Features:
Support routing features
Support EPON and GPON auto-discovery.
Support auto-discovery
Auto Link detection
Remote upgrade of software
WAN connections support Route and Bridge mode
Route mode supports PPPoE/DHCP/ static IP
Support QoS and DBA
Support port Isolation and port VLAN configuration
Support Firewall function and IGMP snooping multicast feature
Support LAN IP and DHCP Server configuration
Support Port Forwarding and Loop-Detect
Specialized design for system breakdown prevention to maintain stable system৳ 950.00৳ 1,050.00 -
xPON GPON/EPON ONU BiG
Functional Features:
Support routing features
Support EPON and GPON auto-discovery.
Support auto-discovery
Auto Link detection
Remote upgrade of software
WAN connections support Route and Bridge mode
Route mode supports PPPoE/DHCP/ static IP
Support QoS and DBA
Support port Isolation and port VLAN configuration
Support Firewall function and IGMP snooping multicast feature
Support LAN IP and DHCP Server configuration
Support Port Forwarding and Loop-Detect
Specialized design for system breakdown prevention to maintain stable system৳ 900.00৳ 1,000.00 -
HUAWEI 1GE EPON ONU HG8010H
HUAWEI 1GE EPON ONU HG8010H
Description:
HUAWEI 1GE EPON ONU HG8010H is an indoor optical network terminal (ONT) in the Huawei FTTH solution. By using the EPON technology, ultra-broadband access is provided for home and SOHO users. The HG8010H provides one GE/FE auto-adapting Ethernet port. The HG8010 features high-performance forwarding capabilities to ensure an excellent experience with VoIP, Internet, and HD video services.
Plug-and-play: services can be deployed by one click on the NMS, and on-site configuration is not required.
Remote diagnosis: Remote fault locating is implemented by the loop-line test of POTS ports, call emulation and PPPoE dialup emulation initiated by the NMS.
Link monitoring: E2E link detection is achieved using 802.1ag Ethernet OAM.
High speed forwarding: 900 Mbit/s forwarding in the NAT scenario.
IPv6 Capability: support IPv6/IPv4 dual stack and DS-Lite.
Key Features:
Plug and play: Configurations are automatically delivered by the Network Management System so on-site commissioning is not required
Remote diagnosis: POTS ports support loop line tests and call simulation tests, implementing remote fault locating. Supports remote batch upgrades, and up to 2,000 devices can be upgraded each hour
Link monitoring: IEEE 802.1ag-based Ethernet OAM that implements end-to-end (E2E) link detection and network isolation
Energy wise: SOC chips feature high-integration capabilities. Each chip integrates the PON, voice, gateway, and LSW modules, with 25 percent power savings
৳ 850.00৳ 900.00 -
HUAWEI EcoLife HG8010H EPON ONU BIG
HUAWEI 1GE EPON ONU HG8010H
Description:
The EchoLife HG8010H is an indoor optical network terminal (ONT) in Huawei FTTH solution. By using the EPON technology, ultra-broadband access is provided for home and SOHO users. The HG8010H provides one GE/FE auto-adapting Ethernet port. The HG8010 features high-performance forwarding capabilities to ensure excellent experience with VoIP, Internet and HD video services.
Plug-and-play: services can be deployed by one click on the NMS, and on-site configuration is not required.
Remote diagnosis: Remote fault locating is implemented by the loop-line test of POTS ports, call emulation and PPPoE dialup emulation initiated by the NMS.
Link monitoring: E2E link detection is achieved using 802.1ag Ethernet OAM.
High speed forwarding: 900 Mbit/s forwarding in the NAT scenario.
IPv6 Capability: support IPv6/IPv4 dual stack and DS-Lite.
Key Features:
Plug and play: Configurations are automatically delivered by the Network Management System so on-site commissioning is not required
Remote diagnosis: POTS ports support loop line tests and call simulation tests, implementing remote fault locating. Supports remote batch upgrades, and up to 2,000 devices can be upgraded each hour
Link monitoring: IEEE 802.1ag-based Ethernet OAM that implements end-to-end (E2E) link detection and network isolation
Energy wise: SOC chips feature high-integration capabilities. Each chip integrates the PON, voice, gateway, and LSW modules, with 25 percent power savings
৳ 850.00৳ 900.00 -
Visual Fault Locator
30mW 30KM Visual Fault Locator
ON THE WAY Red Light Fiber Optic Cable Tester Meter with 2.5 mm Universal Connector
FC Male to LC Female Adapter for CATV Telecommunications Engineering Maintenance
Product Dimensions : 0.98 x 6.81 x 0.98 inches; 3.99 Ounces
Size: Standard Type: 30mW
৳ 2,500.00৳ 3,000.00 -
HUAWEI HG8310M GPON ONU, BiG
Huawei HG8310M FTTH Product Overview
Huawei HG8310M FTTH optical network terminal (ONU) is an indoor optical network terminal in the Huawei FTTx solution. By using GPON technology, ultra-broadband access is provided for home and SOHO users. The home gateway then can be connected to a PC, Mobile Terminal, STB, or Videophone to provide high-speed data, video services.
This model supports one GE Ethernet interface and effectively guarantees data and HD video service experience through high-performance forwarding capability and also this provides customers with all-optical access solution and future-oriented service support capabilities.
৳ 870.00৳ 920.00 -
-
netis switch 5 port
5 10/100Mbps Auto-Negotiation RJ45 ports, supports auto MDI/MDIX
Green Ethernet technology saves the power up to 70%
IEEE 802.3x flow control provides reliable data transfer
Plastic case, desktop or wall-mounting design better for home and office use
Plug and play, no configuration required৳ 530.00৳ 550.00 -
VISUAL FAULT LOCATOR LASER LIGHT 30 MW
Pen type VFL are compact but powerful Visual Fault Locator, with an output power up to 30mw, could be used to locate bends &
breaks in jacked or bare fiber within 30Km. It could also be used to identify the connectors in patch panels and identify the
fibers during splicing operation.
pen-type red light emitting device by using 650nm semiconductor laser to emit red light, stable, and optical interface is
connected into the multimode and single-mode optical fiber cable, optical fiber jumper fault detection function.Optical
engineering construction, network maintenance, fiber optical devices indispensable production and research toolsFeatures:
2.5mm universal connector
2Hz glint or continuous optput
Operates either in CW or Glint
Small size, easy to field test
High quality pen type visual fault locator
Easy identification of fiber break,bend, you can protect the fiber layer
To-end fiber identification
Complete mechanical connecting point detection and optimization
Crash-proof and dust-proof design for laser head
Portable and rugged, easy to use
Possess a power saving mode, the instrument automatically shut off the power after idle for 10 minutes.Application:
– Telecom, CATV engineering and maintenance
– integrated wiring construction and maintenance
– The production and research of optical devices
– other optical engineering৳ 2,500.00৳ 2,700.00 -
Fiber Optic Fusion Splice Protector Sleeves
Fiber Optic Fusion Splice Protector Protection Sleeves, Clear Heat Shrinkable Tube
Made in china per peace 2 tk no warranty garanty
Product features
Clear sleeve make it easy to detect splice before shrinkage
Easily use and avoid any damages to the optical fiber during installation
Moisture resistant for environmental protection
Consist of a rod of reinforcing the splice, heat fusion tubing and cross-linked polyolefin. To rebuild the coating of fiber to provide mechanical strength at the fusion joint area and keep optical transmission properties
High grade 304 stainless steel needle, rust-proof৳ 1.00৳ 1.25 -
Optical Power Meter 4 in 1 Solution
Optical Power Meter 4 in 1 Solution
Tech test Multi-Function 3 In 1 Optical Power Meter With Fiber Optic Network Cable Tester Digital Multimeter
Feature:
Measurement: -70 +6dBm
Support RJ45 Signal Testing
Optical Strength Testing
Virtual Fault Detector (VFD)
Power Supply: Lithium Battery৳ 3,250.00৳ 3,600.00
