Shop
-
Mikrotik CCR1036-12G-4S Router
Mikrotik CCR1036-12G-4S Router Price in Bangladesh.
CCR1036-12G-4S is an industrial grade router with cutting edge 36 core CPU. If you need many millions of packets per second – Cloud Core Router with 36 cores is your best choice.
The device comes in a 1U rackmount case, has four SFP ports, twelve Gigabit ethernet ports, a serial console cable and a USB port.
The new r2 version has onboard 8GB of RAM, onboard M.2 slot, full size USB slot and dual PSU for redundancy!
Details Product code CCR1036-12G-4S Architecture TILE CPU TLR4-03680CH-12CE-A3c CPU core count 36 CPU nominal frequency 1.2 GHz Dimensions 355x145x44mm License level 6 Operating System RouterOS v6 (64bit) Size of RAM 4 GB Storage size 1 GB Storage type NAND Tested ambient temperature -20C .. +60C Powering
Details Max Power consumption 60W Number of AC inputs 1 AC input range 100-240 V Ethernet
Details 10/100/1000 Ethernet ports 12 Fiber
Details SFP DDMI Yes SFP ports 4 Peripherals
Details Number of USB ports 1 Serial port RS232 USB Power Reset Yes USB slot type microUSB type AB Other
Details CPU temperature monitor Yes Current Monitor Yes PCB temperature monitor Yes Voltage Monitor Yes ৳ 78,000.00৳ 79,000.00 -
Shinho A3 Splicer
Shinho A3 Splicer
Features:
High precision PASÂ alignment system
*Splicing time 6 sec., heating time 30Â sec.
*Fast boot technology
*More than 240 times splicing and heating
*Resist dust, rain, wind, and shock
*Fiber type identify, AUTO splicing mode
*Easy to change electrodes and fiber holder
*High speed USB, maintenance via the Internet
৳ 80,000.00৳ 90,000.00 -
SHINHO Fusion Splicer X-97
SHINHO Fusion Splicer X-97
- Handheld, Small, Light
- Industrial standard screen
- Core to core digital alignment
- 8s splicing stime, 26s tube heating time
- 5800mAh and pluggable Li-battery, Typical 200 cycles
- ARC calibrated by temperature and air pressure automatically
৳ 82,000.00৳ 90,000.00 -
SHINHO Fusion Splicer X-97
SHINHO Fusion Splicer X-97
- Handheld, Small, Light
- Industrial standard screen
- Core to core digital alignment
- 8s splicing stime, 26s tube heating time
- 5800mAh and pluggable Li-battery, Typical 200 cycles
- ARC calibrated by temperature and air pressure automatically
৳ 82,500.00৳ 90,000.00 -
DBC 8 PORT OLT EPON
DBC 8 PORT OLT
Product Description
8 Port Optical Line Terminal৳ 83,000.00৳ 85,000.00 -
SEIKO FIER -S6 SPLICE MACHINE
SEIKO FIER -S6 SPLICE MACHINE
Core to core digital alignment
6s for splicing, 18s for tube-heating.
4.3-inch touch screen, small size, easy to carry.
Three-in-one fiber fixture, suitable for all types of optic fibers.
High-power dual-LED light, convenient for night construction.
5200mAh removable lithium battery, 280 cycles splicing and heating.
ARC calibrated by temperature and air pressure automatically
No mirror design, reducing maintenance workload.
Apply to high & low temperature, high altitude and harsh environment.
Specifications
Fiber count Single
Applicable fiber SM (G.652), MM (G.651), DS (G.653), NZDS (G.655), others (like G.657)
Splicing loss 0.02dB (SM), 0.01dB (MM), 0.04dB (DS), 0.04dB (NZDS)
Return loss >60dB
Operate mode Manual, Auto
Fiber alignment Core to core alignment
Splicing time Typical 6s
Heating time Typical 18s
Heat shrinkable tube 60mm, 40mm
Fiber cleaved length 8-16mm
Fiber view magnification 350X (X or Y view), 150X (X and Y view)
Display 4.3-inch touch-screen LCD
Tension test 2N
Battery capacity 5200mAh removable inner Li-battery, 280 cycles splicing and heating after one-fully charged.
Electrode life Around 5000 ARC discharges
Interface USB for data download and software update
Night construction Built-in high-power dual-LED lights
Power supply Adaptor, input: AC100-240V, output: DC13.5V/4.8A.
Operation condition Temperature: -15-50ºC, humidity: <95%RH (no condensation)
Working altitude: 0-5000m. Resist max. wind speed: ≤15m/s
Weight 1.95 kg (including battery)
Dimension 130mm(L)×154mm(W)×132mm(H)
Standard Package
No Items Qty
1 Fusion splicer 1
2 Fiber cleaver 1
3 Fiber stripper 1
4 Drop cable stripper 1
5 AC adaptor 1
6 P.S cord 1
7 Spare electrodes 1 pair
8 Cooling tray 1
9 Manual (CD) 1
10 Carrying case 1
11 Calibration certificate 1৳ 85,000.00৳ 90,000.00 -
BDCOM P3608-2TE-1AC EPOM OLT 8 PORT
BDCOM P3608-2TE-1AC OLT
Maximum coupling ratio, 1:64
128G Backplane Bandwidth
Volume of the MAC table: 32K
Ports 8 EPON ports
8 GE ports (4 GE optical ports and 4 GE TX/SFP ports)
Optional 2 10G ports
EPON A 1Gbps transmission rate with downlink and uplink symmetry
Average emitting power of the PON port: +2dbm to +7dbm
Light reception sensitivity of the PON port: no less than -30dBm
Security: ONU authentication mechanism
Standard IEEE802.3ah
IEEE 802.1D, Spanning Tree
IEEE 802.1Q, VLAN
IEEE 802.1w, RSTP
IEEE 802.3ad, LACP
Ethernet – II
QoS Backpressure flow control (half duplex)
IEEE 802.3x flow control (full duplex)
IEEE 802.1p, CoS
WR, SP and FIFO
ONU-based uplink/downlink rate limit
DBA and SLA
VLAN Port-based VLAN
4K active VLANs
QinQ and flexible QinQ
IP routing Static route, RIPv1/v2, OSPF, etc.
Routing table: 12K
Multicast IGMP v1/2/3
IGMP Snooping
Reliability Unidirectional Link Detection (UDLD)
Optical path protection of EPON
Network security MAC limit
Port isolation
Storm control
Flow-based ACL
Transmission data encryption on the PON interface
Management CLI, SNMP and TELNET
TFTP and FTP
Chassis 442.5mm(W) x300mm(D) x 44mm(H)
Installation: A 19-inch cabinet
Weight: 2kg
Environment Working condition: 0℃-55℃; 10%-85% non-condensing
Storage condition: -40℃-80℃; 5%-95% non-condensing
Power Input voltage: AC90 to 264V，DC -36 to -72V
Dual power inputs, AC/DC power hybrid, power module’s hot swap
Over-current protection and over-voltage protectionOne year Warranty.
৳ 88,000.00৳ 89,500.00 -
Shinho X-800 Fusion Splice
*6s typically for splicing and 26s for heating,
*Fiber core max. magnifications up to 250X,
*Electrodes discharging more than 4000 times,
*Integrated heater,easy and convenient to operate,
*USB port for software updating and data records exporting,
*PAS image digital processing system, core to core alignment,
*ARC calibrated by temperature and air pressure automatically,
*360° rubber armor protects machine from shock, water and dust,
*5800mAh and pluggable Li-battery,typical 200 cycles splicing and heating,
*Multi-function holder clamps, suitable for bare fibers, drop cables, patch cords etc.X-800 Fusion Splcier Data Sheet
Applicable fiber SM(G.652), MM(G.651), DS(G.653), NZDS(G.655), others(including G.657)
Fiber count Single
Applicable fiber dimensions Cladding diameter: 80 -150μm, Coating diameter: 160 -900μm
Typical splice loss 0.02dB(SM), 0.01dB(MM), 0.04dB(DS), 0.04dB(NZDS)
Return loss >60db
Fiber cleaved length 10-16mm (coating diameter< 250μm ), 16mm(coating diameter: 250-1000μm )
Splicing program 40 groups
Operate mode Manual, Automatic
Auto-heating Available
Typical splicing time 8 seconds
Tube heating time 26 seconds for 60mm and 40mm shrinkable sleeves
Fiber view magnification 250X(X or Y view), 125X(X and Y view)
Viewing method and display 2 CMOS cameras, 4.3 inch color LCD monitor
Storage of splice result 4000 results
Loss evaluation Available
Tension test 1.8-2.2N
Interface GUI menu interface, easier operation
Battery capacity 5800mAh, typical 180 cycles(splice and tube heat), pluggable inner Li-battery
Power supply Adaptor, input: AC100-240V(50/60HZ)
Electrode life More than 4000 ARC discharges, can be replaced conveniently
Terminals USB 2.0 port, for uploading splice results and upgrading software
Operating condition Altitude: 0-5000m, Humidity: 0-95%, Temperature: -10ºC~+50ºC;Wind speed: max 15m/s
Dimension 149mm(L)x120mm(W)x127mm(H)
Weight 1.9kg including battery৳ 95,000.00৳ 100,000.00 -
Splicer Machine DVP-760 PRO with power meter
Splicer Machine DVP-760
Description
Splicer Machine DVP-760 has compact and light weight design, fully automatic operation, 5000m altitude, splicer machine system test, color LCD monitor, pause function, storage 8000 groups of splice results, USB and DC, battery capacity up to 120 times of continuous splice and heat.
৳ 98,000.00৳ 105,000.00 -
AC-Net F-95X Splicer Machine
AC-Net F-95X Splicer Machine Price in Bangladesh.
AC-Net F-95X optical fiber splicer machine has 100% true loss report display after splicing, supports FTTH and cable TV digital system, 7800 mAh battery provides 400 nos splicing, high performance and low maintenance, suitable for rough conditions in Bangladesh.
৳ 110,000.00৳ 115,000.00 -
Dell PowerEdge R720 Server
Dell PowerEdge R720 Server
Brand: Dell Poweredge
Model: R420 1U Rack Mount
Core: 32
Ram: 64GB
Hard disk: 2 X 2Tb
Power Supply=02pcs
Fresh (Used)৳ 110,000.00৳ 125,000.00 -
AI 9 Fusion Splicer Machine
AI 9 fusion splicer
The AI-9 optical fiber fusion splicer uses the high-speed image process technology and special exact orientation technology, so that the whole process of fiber’s fusion can be finished in 10 seconds automatically.
By default, the device is configured in auto mode. In most cases, any adjustments of the default settings are not required. No calibration is required – it must be done only in case of problems with obtaining the correct splice. Available in the Google Play and AppStore application is required, for example, to change the default splicing program or calibration due to extremely changing environmental conditions.
৳ 110,000.00৳ 115,000.00
