Shop
-
Clothing & Apparel (5)
-
Consumer Electronic (7)
-
Foods & Grocery (14)
-
Health & Beauty (7)
-
Home, Garden & Kitchen (7)
-
IT & Networking (123)
-
Jewelry & Watches (6)
-
Phone, Computer & Accessories (72)
-
Sport & Outdoor (20)
-
Toy Market (1)
-
TP-Link (1)
-
C DATA ONU EPON
C DATA ONU
C-Data EPONN optical network unit design to meet the requirement of the broadband access network. It applies to FTTH/FTTO to provide the data and video service based on the EPON network.
1GE EPON ONU is based on a ZTE high-performance xPON access chip. The chip supposes three mode：EPON/P2P, comply with the GPON standard of g.984, g.983, have good xPON interoperability compatibility.
1GE EPON ONU provides one GE auto-adapting Ethernet ports. Its features high-performance forwarding capabilities to ensure an excellent experience with Internet and HD video services. Therefore, the FD600-521G-HZ630 provides a perfect terminal solution and future-oriented service supporting capabilities for FTTH deployment. It has good third-party compatibility to work with the third-party OLT, such as Huawei/ZTE/Fibroma/Alcatel·Lucent.
৳ 1,100.00৳ 1,200.00 -
C DATA ONU EPON
C DATA ONU
C-Data ONU EPONN optical network unit design to meet the requirement of the broadband access network. It applies to FTTH/FTTO to provide the data and video service based on the EPON network.
1GE EPON ONU is based on a ZTE high-performance xPON access chip. The chip supposes three mode：EPON/P2P, comply with the GPON standard of g.984, g.983, have good xPON interoperability compatibility.
1GE EPON ONU provides one GE auto-adapting Ethernet ports. Its features high-performance forwarding capabilities to ensure an excellent experience with Internet and HD video services. Therefore, the FD600-521G-HZ630 provides a perfect terminal solution and future-oriented service supporting capabilities for FTTH deployment. It has good third-party compatibility to work with the third-party OLT, such as Huawei/ZTE/Fibroma/Alcatel·Lucent.
৳ 1,100.00৳ 1,200.00 -
DELL Latitude 7490
DELL Latitude 7490 || Intel Core i5-8250U @1.70GHz 8GB RAM 256GB M.2 SSD 14″ FHD Touch Display Laptop
Condition                             Used
Laptop Type                        Standard
Processor Type                  Intel Core i5-8250U
Processor Speed                Quad Core, 3.4GHz, 6M Cache, 15 W
Screen                                  14.0 inch FHD (1920 x 1080), Anti-Glare Display
RAMÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 8GB DDR-4 2400 MHz SDRAM
Storage                                256 GB SSD
Disk Type                             SSD
Graphics Card                   Intel UHD Graphics 620 (8th Gen Intel Core)
Audio/Speaker                  Play with 2 Speaker
Networking                         Gigabit LAN, Wi-Fi, Bluetooth
Webcam                              Full HD Webcam
Touchpad                            Multi-touch Gestures support
Others Feature                  Backlit Keyboard and Finger Print Security
Battery                                3-cell Lithium-ion, E5 65 W power adapter
৳ 30,500.00৳ 33,000.008% off -
Dell PowerEdge R420 Server
Dell PowerEdge R420 Server
Brand: Dell Poweredge
Model: R420 1U Rack Mount
Core: 32
Ram: 64GB
Hard disk: 2 X 2Tb
Power Supply=02pcs
Fresh (Used)৳ 75,000.00৳ 80,000.00 -
Dell PowerEdge R720 Server
Dell PowerEdge R720 Server
Brand: Dell Poweredge
Model: R420 1U Rack Mount
Core: 32
Ram: 64GB
Hard disk: 2 X 2Tb
Power Supply=02pcs
Fresh (Used)৳ 110,000.00৳ 125,000.00 -
PLC Splitter 1×2
PLC Splitter 1×2 Steel Tube No Connector 0.9mm Cable Diameter Optic Plc Splitter 1260-1610nm
Description
Planar lightwave circuit splitter (PLC Splitter) is a type of optical power management device that is fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON(EPON/GPON) networks to realize optical signal power splitting.
We provides whole series of 1xN and 2xN splitter products that are tailored for specific applications. All PLC Splitter products meet GR-1209-CORE and GR-1221-CORE requirements.
Features
1Low insertion loss and low PDL
2High channel counts
3Exceptional reliability and stability
4Wide operating wavelength
৳ 170.00৳ 180.00 -
PLC Splitter 1×2
PLC Splitter 1×2 Steel Tube No Connector 0.9mm Cable Diameter Optic Plc Splitter 1260-1610nm
Description
Planar lightwave circuit splitter (PLC Splitter) is a type of optical power management device that is fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON(EPON/GPON) networks to realize optical signal power splitting.
We provides whole series of 1xN and 2xN splitter products that are tailored for specific applications. All PLC Splitter products meet GR-1209-CORE and GR-1221-CORE requirements.
Features
1Low insertion loss and low PDL
2High channel counts
3Exceptional reliability and stability
4Wide operating wavelength
৳ 135.00৳ 140.00 -
PLC SPLITTER 1X4
PLC SPLITTER 1X4 Steel Tube No Connector 0.9mm Cable Diameter Optic Plc Splitter 1260-1610nm
Description
Planar lightwave circuit splitter (PLC Splitter) is a type of optical power management device that is fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON(EPON/GPON) networks to realize optical signal power splitting.
We provides whole series of 1xN and 2xN splitter products that are tailored for specific applications. All PLC Splitter products meet GR-1209-CORE and GR-1221-CORE requirements.
Features
1Low insertion loss and low PDL
2High channel counts
3Exceptional reliability and stability
4Wide operating wavelength
৳ 230.00৳ 260.00 -
PLC SPLITTER 1X4
PLC SPLITTER 1X4 Steel Tube No Connector 0.9mm Cable Diameter Optic Plc Splitter 1260-1610nm
Description
Planar lightwave circuit splitter (PLC Splitter) is a type of optical power management device that is fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON(EPON/GPON) networks to realize optical signal power splitting.
We provides whole series of 1xN and 2xN splitter products that are tailored for specific applications. All PLC Splitter products meet GR-1209-CORE and GR-1221-CORE requirements.
Features
1Low insertion loss and low PDL
2High channel counts
3Exceptional reliability and stability
4Wide operating wavelength
৳ 140.00৳ 160.00 -
PLC SPLITTER 1X8
PLC SPLITTER 1X8 Steel Tube No Connector 0.9mm Cable Diameter Optic Plc Splitter 1260-1610nm
Description
Planar lightwave circuit splitter (PLC Splitter) is a type of optical power management device that is fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON(EPON/GPON) networks to realize optical signal power splitting.
We provides whole series of 1xN and 2xN splitter products that are tailored for specific applications. All PLC Splitter products meet GR-1209-CORE and GR-1221-CORE requirements.
Features
1Low insertion loss and low PDL
2High channel counts
3Exceptional reliability and stability
4Wide operating wavelength
৳ 260.00৳ 300.00 -
PLC SPLITTER 1X8
PLC SPLITTER 1X8 Steel Tube No Connector 0.9mm Cable Diameter Optic Plc Splitter 1260-1610nm
Description
Planar lightwave circuit splitter (PLC Splitter) is a type of optical power management device that is fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON(EPON/GPON) networks to realize optical signal power splitting.
We provides whole series of 1xN and 2xN splitter products that are tailored for specific applications. All PLC Splitter products meet GR-1209-CORE and GR-1221-CORE requirements.
Features
1Low insertion loss and low PDL
2High channel counts
3Exceptional reliability and stability
4Wide operating wavelength
৳ 170.00৳ 180.00 -
SEIKO FIER -S6 SPLICE MACHINE
SEIKO FIER -S6 SPLICE MACHINE
Core to core digital alignment
6s for splicing, 18s for tube-heating.
4.3-inch touch screen, small size, easy to carry.
Three-in-one fiber fixture, suitable for all types of optic fibers.
High-power dual-LED light, convenient for night construction.
5200mAh removable lithium battery, 280 cycles splicing and heating.
ARC calibrated by temperature and air pressure automatically
No mirror design, reducing maintenance workload.
Apply to high & low temperature, high altitude and harsh environment.
Specifications
Fiber count Single
Applicable fiber SM (G.652), MM (G.651), DS (G.653), NZDS (G.655), others (like G.657)
Splicing loss 0.02dB (SM), 0.01dB (MM), 0.04dB (DS), 0.04dB (NZDS)
Return loss >60dB
Operate mode Manual, Auto
Fiber alignment Core to core alignment
Splicing time Typical 6s
Heating time Typical 18s
Heat shrinkable tube 60mm, 40mm
Fiber cleaved length 8-16mm
Fiber view magnification 350X (X or Y view), 150X (X and Y view)
Display 4.3-inch touch-screen LCD
Tension test 2N
Battery capacity 5200mAh removable inner Li-battery, 280 cycles splicing and heating after one-fully charged.
Electrode life Around 5000 ARC discharges
Interface USB for data download and software update
Night construction Built-in high-power dual-LED lights
Power supply Adaptor, input: AC100-240V, output: DC13.5V/4.8A.
Operation condition Temperature: -15-50ºC, humidity: <95%RH (no condensation)
Working altitude: 0-5000m. Resist max. wind speed: ≤15m/s
Weight 1.95 kg (including battery)
Dimension 130mm(L)×154mm(W)×132mm(H)
Standard Package
No Items Qty
1 Fusion splicer 1
2 Fiber cleaver 1
3 Fiber stripper 1
4 Drop cable stripper 1
5 AC adaptor 1
6 P.S cord 1
7 Spare electrodes 1 pair
8 Cooling tray 1
9 Manual (CD) 1
10 Carrying case 1
11 Calibration certificate 1৳ 85,000.00৳ 90,000.00
