Shop
-
Clothing & Apparel (5)
-
Consumer Electronic (7)
-
Foods & Grocery (14)
-
Health & Beauty (7)
-
Home, Garden & Kitchen (7)
-
IT & Networking (123)
-
Jewelry & Watches (6)
-
Phone, Computer & Accessories (72)
-
Sport & Outdoor (20)
-
Toy Market (1)
-
TP-Link (1)
-
Mikrotik-CCR1009-7g-1c-1s-router
Mikrotik CCR1009-7G-1C-1S+ Router
No switch-chip – the device now features only fully independent Ethernet ports each with a direct connection to the CPU, allowing to overcome previous shared 1Gbit limitation from switch-chip ports and utilize full potential of CPU processing power on those ports.
Combo-port – a single 1Gbit software interface that has two hardware interfaces – a SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you. Port also allows to switch from one to another interface from software, or in event of disconnect, providing new, unique hardware fail-over feature.
100Mbps SFP support – this is our first device that supports 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP modules.
More throughput – due to how ports are connected to CPU, new CCR1009 models can achieve higher theoretical throughput.
The unit is equipped with dual power supplies built in for redundancy (if one power line fails, the other one will take over automatically).৳ 41,500.00৳ 43,000.00 -
Mikrotik CCR1036-12G-4S Router
Mikrotik CCR1036-12G-4S Router Price in Bangladesh.
CCR1036-12G-4S is an industrial grade router with cutting edge 36 core CPU. If you need many millions of packets per second – Cloud Core Router with 36 cores is your best choice.
The device comes in a 1U rackmount case, has four SFP ports, twelve Gigabit ethernet ports, a serial console cable and a USB port.
The new r2 version has onboard 8GB of RAM, onboard M.2 slot, full size USB slot and dual PSU for redundancy!
Details Product code CCR1036-12G-4S Architecture TILE CPU TLR4-03680CH-12CE-A3c CPU core count 36 CPU nominal frequency 1.2 GHz Dimensions 355x145x44mm License level 6 Operating System RouterOS v6 (64bit) Size of RAM 4 GB Storage size 1 GB Storage type NAND Tested ambient temperature -20C .. +60C Powering
Details Max Power consumption 60W Number of AC inputs 1 AC input range 100-240 V Ethernet
Details 10/100/1000 Ethernet ports 12 Fiber
Details SFP DDMI Yes SFP ports 4 Peripherals
Details Number of USB ports 1 Serial port RS232 USB Power Reset Yes USB slot type microUSB type AB Other
Details CPU temperature monitor Yes Current Monitor Yes PCB temperature monitor Yes Voltage Monitor Yes ৳ 78,000.00৳ 79,000.00 -
Shinho A3 Splicer
Shinho A3 Splicer
Features:
High precision PASÂ alignment system
*Splicing time 6 sec., heating time 30Â sec.
*Fast boot technology
*More than 240 times splicing and heating
*Resist dust, rain, wind, and shock
*Fiber type identify, AUTO splicing mode
*Easy to change electrodes and fiber holder
*High speed USB, maintenance via the Internet
৳ 80,000.00৳ 90,000.00 -
SHINHO Fusion Splicer X-97
SHINHO Fusion Splicer X-97
- Handheld, Small, Light
- Industrial standard screen
- Core to core digital alignment
- 8s splicing stime, 26s tube heating time
- 5800mAh and pluggable Li-battery, Typical 200 cycles
- ARC calibrated by temperature and air pressure automatically
৳ 82,000.00৳ 90,000.00 -
SHINHO Fusion Splicer X-97
SHINHO Fusion Splicer X-97
- Handheld, Small, Light
- Industrial standard screen
- Core to core digital alignment
- 8s splicing stime, 26s tube heating time
- 5800mAh and pluggable Li-battery, Typical 200 cycles
- ARC calibrated by temperature and air pressure automatically
৳ 82,500.00৳ 90,000.00 -
Shinho X-800 Fusion Splice
*6s typically for splicing and 26s for heating,
*Fiber core max. magnifications up to 250X,
*Electrodes discharging more than 4000 times,
*Integrated heater,easy and convenient to operate,
*USB port for software updating and data records exporting,
*PAS image digital processing system, core to core alignment,
*ARC calibrated by temperature and air pressure automatically,
*360° rubber armor protects machine from shock, water and dust,
*5800mAh and pluggable Li-battery,typical 200 cycles splicing and heating,
*Multi-function holder clamps, suitable for bare fibers, drop cables, patch cords etc.X-800 Fusion Splcier Data Sheet
Applicable fiber SM(G.652), MM(G.651), DS(G.653), NZDS(G.655), others(including G.657)
Fiber count Single
Applicable fiber dimensions Cladding diameter: 80 -150μm, Coating diameter: 160 -900μm
Typical splice loss 0.02dB(SM), 0.01dB(MM), 0.04dB(DS), 0.04dB(NZDS)
Return loss >60db
Fiber cleaved length 10-16mm (coating diameter< 250μm ), 16mm(coating diameter: 250-1000μm )
Splicing program 40 groups
Operate mode Manual, Automatic
Auto-heating Available
Typical splicing time 8 seconds
Tube heating time 26 seconds for 60mm and 40mm shrinkable sleeves
Fiber view magnification 250X(X or Y view), 125X(X and Y view)
Viewing method and display 2 CMOS cameras, 4.3 inch color LCD monitor
Storage of splice result 4000 results
Loss evaluation Available
Tension test 1.8-2.2N
Interface GUI menu interface, easier operation
Battery capacity 5800mAh, typical 180 cycles(splice and tube heat), pluggable inner Li-battery
Power supply Adaptor, input: AC100-240V(50/60HZ)
Electrode life More than 4000 ARC discharges, can be replaced conveniently
Terminals USB 2.0 port, for uploading splice results and upgrading software
Operating condition Altitude: 0-5000m, Humidity: 0-95%, Temperature: -10ºC~+50ºC;Wind speed: max 15m/s
Dimension 149mm(L)x120mm(W)x127mm(H)
Weight 1.9kg including battery৳ 95,000.00৳ 100,000.00 -
Shinho X-900 Fiber Splicer
Shinho X-900 Fiber Splicer
6 motors accurate core to core alignment, can detect automatic fiber, 6-second stable splicing and 18-second fast heating, automatic & real-time ARC calibration. The exact time of heating can be observed in temperature, GUI menu interface, 5200mAh Li-battery, 2 CMOS cameras, 5.0-inch color LCD monitor, anti-shock and anti-dust and waterproof, apply to bare fibers / drop cables and patch cords, 160 x 136 x 140mm dimension.
৳ 120,000.00৳ 125,000.00 -
SHINHO X-86 SPLICE MACHINE
SHINHO X-86 SPLICE MACHINE
Metro style GUI, easy operation;
High definition 5.7′ colorful LCD;
USB port for software upgrading;
8s typically for splicing and 28s for heating;
Up to 4000 groups of records can be stored;
PAS technology, core to core digital alignment;
Intelligent operation, auto heating and splicing;
Rubber armor protects machine from shock or impact;
8800mAh and removable Li-battery, Typical 250 cycles;
Various display groups, max. Magnifications up to 300X;
ARC calibrated by temperature and air pressure automatically;
৳ 135,000.00৳ 140,000.00 -
ATOMO AFS 40 SPLICER
ATOMO AFS 40 SPLICER
Features
- Â Stable low splicing loss spread (0.02dB +_ 0.02 G652)
- Â High-speed splicing and shrinking heater (8 Sec / 16 Sec)
- Â Full touch screen GUI
- Â Switchable SOC (Splice On Connector)
- Â platform (Holder, Heater).
-  Durable battery power (over 220 times splicing and ​shrinking).
- Â Full cover LED working illumination.
- Â Auto compensation function for various environments.
For other related splicers please visit us at https://shop.tripleplaytechnologybd.com/product-category/internet/splicing-machine-internet/
৳ 135,000.00৳ 140,000.00 -
Mikrotik CCR1036-12G-4S Router
Mikrotik CCR1036-12G-4S Router Price in Bangladesh.
CCR1036-12G-4S is an industrial grade router with cutting edge 36 core CPU. If you need many millions of packets per second – Cloud Core Router with 36 cores is your best choice.
The device comes in a 1U rackmount case, has four SFP ports, twelve Gigabit ethernet ports, a serial console cable and a USB port.
The new r2 version has onboard 8GB of RAM, onboard M.2 slot, full size USB slot and dual PSU for redundancy!
Details Product code CCR1036-12G-4S Architecture TILE CPU TLR4-03680CH-12CE-A3c CPU core count 36 CPU nominal frequency 1.2 GHz Dimensions 355x145x44mm License level 6 Operating System RouterOS v6 (64bit) Size of RAM 4 GB Storage size 1 GB Storage type NAND Tested ambient temperature -20C .. +60C Powering
Details Max Power consumption 60W Number of AC inputs 1 AC input range 100-240 V Ethernet
Details 10/100/1000 Ethernet ports 12 Fiber
Details SFP DDMI Yes SFP ports 4 Peripherals
Details Number of USB ports 1 Serial port RS232 USB Power Reset Yes USB slot type microUSB type AB Other
Details CPU temperature monitor Yes Current Monitor Yes PCB temperature monitor Yes Voltage Monitor Yes ৳ 135,000.00৳ 140,000.00 -
INNO-ifs-15 Splicing Machine
INNO-ifs-15 Splicing Machine
Return loss: >60db
size: 168x145x160mm
Splice time: 9s
Protection sleeve: 60mm,40mm
Product description: INNO IFS-15 Fiber Fusion Splicer/ Fiber Optic Splicing Machine৳ 140,000.00৳ 145,000.00 -
SHINHO X-86H SPLICE MACHINE
SHINHO X-86H SPLICE MACHINE
Applicable fiber SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T
G.655), others(including G.657)Cladding diameter 80 -150μm
Coating diameter 160 – 900μm
Typical splice loss SM 0.02dB, MM 0.01dB, DS 0.04dB, NZDS 0.04dB
Return loss <60dB
Cleaved length 10~16mm ( Diameter of coating < 250μm ) ; 16mm ( Diameter of coating
250~1000μm )Splicing program 40 groups
Operate mode Manual, Automatic
Auto-Heat Available
Typical splicing time 8 seconds
Heating time 26 seconds for 60mm, 40mm shrinkable sleeve
Magnification 300 times for single display, 150 times for double display
Photoelectric system Two high sensitive cameras, 5.7′ 640×480 colorful LCD
Splicing data record Storing up to 4000 groups of records
Loss evaluation Available
Tension test 1.8~2.2N
Interface GUI menu interface, easy operation
Battery capacity 5800mAh, 250 times fusion and heating, pluggable, real-time power monitor
Power supply Adaptor, input: AC 100-240V ( 50/60HZ ) , output: DC 11~13.5V
Electrodes lifetime More than 4000 times splicing, electrodes can be replaced conveniently
External port USB2.0 port, used to derive splicing record data, software upgrade
Operate environment Altitude: 0~5000m; Relative humidity: 0~95%; Temperature: -10ºC~+50ºC;
Wind speed: max 15m/sVolume/Weight 160mm(L)×150mm(W)×145mm(H) / 2.75kg (including battery)
৳ 140,000.00৳ 145,000.00
