DBC
-
DBC 8 PORT OLT EPON
DBC 8 PORT OLT
Product Description
8 Port Optical Line Terminal৳ 83,000.00৳ 85,000.00 -
DBC OLT EPON 4 Port
DBC OLT EPON 4 Port
DBC GEPON OLT is 1U height 19 inch rack mount products. The features of the OLT are small, convenient, flexible, easy to deploy, high performance. It is appropriate to be deployed in compact room environment. The OLTs can be used for “Triple-Play”, VPN, IP Camera, Enterprise LAN and ICT applications.
৳ 44,000.00৳ 47,000.00 -
DBC Optical Power Meter
Photo detector of large sensitive area, which is easy to clean.
Fast conversion and high refresh rate,up to 20Hz.
High sensitivity,up to-70dBm(Type A)and-50dBm(B type).
2pcs of AA battery as power supply.৳ 6,500.00৳ 6,650.00 -
DBC PLC Splitter 1×2
PLC Splitter 1×2 Steel Tube No Connector 0.9mm Cable Diameter Optic Plc Splitter 1260-1610nm
Description
Planar lightwave circuit splitter (PLC Splitter) is a type of optical power management device that is fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON(EPON/GPON) networks to realize optical signal power splitting.
We provides whole series of 1xN and 2xN splitter products that are tailored for specific applications. All PLC Splitter products meet GR-1209-CORE and GR-1221-CORE requirements.
Features
1Low insertion loss and low PDL
2High channel counts
3Exceptional reliability and stability
4Wide operating wavelength
৳ 120.00৳ 130.00 -
DBC PLC Splitter 1×4
PLC Splitter 1×2 Steel Tube No Connector 0.9mm Cable Diameter Optic Plc Splitter 1260-1610nm
Description
Planar lightwave circuit splitter (PLC Splitter) is a type of optical power management device that is fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON(EPON/GPON) networks to realize optical signal power splitting.
We provides whole series of 1xN and 2xN splitter products that are tailored for specific applications. All PLC Splitter products meet GR-1209-CORE and GR-1221-CORE requirements.
Features
1Low insertion loss and low PDL
2High channel counts
3Exceptional reliability and stability
4Wide operating wavelength
৳ 140.00৳ 150.00 -
DBC PLC Splitter 1×8
PLC Splitter 1×2 Steel Tube No Connector 0.9mm Cable Diameter Optic Plc Splitter 1260-1610nm
Description
Planar lightwave circuit splitter (PLC Splitter) is a type of optical power management device that is fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON(EPON/GPON) networks to realize optical signal power splitting.
We provides whole series of 1xN and 2xN splitter products that are tailored for specific applications. All PLC Splitter products meet GR-1209-CORE and GR-1221-CORE requirements.
Features
1Low insertion loss and low PDL
2High channel counts
3Exceptional reliability and stability
4Wide operating wavelength
৳ 170.00৳ 180.00 -
DBC-EDFA 1550nm / 1490nm / 1310nm
DBC-EDFA 1550nm / 1490nm / 1310nm
Description
BC-EDFA optical amplifier adopts reliable, high-quality 980nm and 1480nm pump laser. Upon
special design and exclusive optimization technology, it greatly reduces the signal degradation.
The machine achieves reliable optical amplification through low-noise EDF (Erbium-doped fiber)
and high-efficient circuitry.
Combined with 1550nm optical transmitter, BC-EDFA is widely used in long-distance transmission
among ring network, distribution network and town network.
Features- 1U, 19” standard rack-mount
- World brand laser pumps
- Low noise
- Output power from 13 to 24dBm
- Operational parameters displayed on LCD OF front panel
- Standard RJ45 interfaces; SNMP
৳ 70,000.00৳ 75,000.00 -
Shinho A3 Splicer
Shinho A3 Splicer
Features:
High precision PAS alignment system
*Splicing time 6 sec., heating time 30 sec.
*Fast boot technology
*More than 240 times splicing and heating
*Resist dust, rain, wind, and shock
*Fiber type identify, AUTO splicing mode
*Easy to change electrodes and fiber holder
*High speed USB, maintenance via the Internet
৳ 80,000.00৳ 90,000.00 -
SHINHO Fusion Splicer X-97
SHINHO Fusion Splicer X-97
- Handheld, Small, Light
- Industrial standard screen
- Core to core digital alignment
- 8s splicing stime, 26s tube heating time
- 5800mAh and pluggable Li-battery, Typical 200 cycles
- ARC calibrated by temperature and air pressure automatically
৳ 82,000.00৳ 90,000.00 -
SHINHO Fusion Splicer X-97
SHINHO Fusion Splicer X-97
- Handheld, Small, Light
- Industrial standard screen
- Core to core digital alignment
- 8s splicing stime, 26s tube heating time
- 5800mAh and pluggable Li-battery, Typical 200 cycles
- ARC calibrated by temperature and air pressure automatically
৳ 82,500.00৳ 90,000.00 -
Shinho X-800 Fusion Splice
*6s typically for splicing and 26s for heating,
*Fiber core max. magnifications up to 250X,
*Electrodes discharging more than 4000 times,
*Integrated heater,easy and convenient to operate,
*USB port for software updating and data records exporting,
*PAS image digital processing system, core to core alignment,
*ARC calibrated by temperature and air pressure automatically,
*360° rubber armor protects machine from shock, water and dust,
*5800mAh and pluggable Li-battery,typical 200 cycles splicing and heating,
*Multi-function holder clamps, suitable for bare fibers, drop cables, patch cords etc.X-800 Fusion Splcier Data Sheet
Applicable fiber SM(G.652), MM(G.651), DS(G.653), NZDS(G.655), others(including G.657)
Fiber count Single
Applicable fiber dimensions Cladding diameter: 80 -150μm, Coating diameter: 160 -900μm
Typical splice loss 0.02dB(SM), 0.01dB(MM), 0.04dB(DS), 0.04dB(NZDS)
Return loss >60db
Fiber cleaved length 10-16mm (coating diameter< 250μm ), 16mm(coating diameter: 250-1000μm )
Splicing program 40 groups
Operate mode Manual, Automatic
Auto-heating Available
Typical splicing time 8 seconds
Tube heating time 26 seconds for 60mm and 40mm shrinkable sleeves
Fiber view magnification 250X(X or Y view), 125X(X and Y view)
Viewing method and display 2 CMOS cameras, 4.3 inch color LCD monitor
Storage of splice result 4000 results
Loss evaluation Available
Tension test 1.8-2.2N
Interface GUI menu interface, easier operation
Battery capacity 5800mAh, typical 180 cycles(splice and tube heat), pluggable inner Li-battery
Power supply Adaptor, input: AC100-240V(50/60HZ)
Electrode life More than 4000 ARC discharges, can be replaced conveniently
Terminals USB 2.0 port, for uploading splice results and upgrading software
Operating condition Altitude: 0-5000m, Humidity: 0-95%, Temperature: -10ºC~+50ºC;Wind speed: max 15m/s
Dimension 149mm(L)x120mm(W)x127mm(H)
Weight 1.9kg including battery৳ 95,000.00৳ 100,000.00 -
SHINHO X-86 SPLICE MACHINE
SHINHO X-86 SPLICE MACHINE
Metro style GUI, easy operation;
High definition 5.7′ colorful LCD;
USB port for software upgrading;
8s typically for splicing and 28s for heating;
Up to 4000 groups of records can be stored;
PAS technology, core to core digital alignment;
Intelligent operation, auto heating and splicing;
Rubber armor protects machine from shock or impact;
8800mAh and removable Li-battery, Typical 250 cycles;
Various display groups, max. Magnifications up to 300X;
ARC calibrated by temperature and air pressure automatically;
৳ 135,000.00৳ 140,000.00
