BDCom
-
BDCOM 4PORT EPON OLT P3310D-2AC
BDCOM P3310C-2AC 4 Port OLT Price in Bangladesh.
BDCOM P3310B complies with IEEE802.3ah and P.R.C intercommunication standard, YD/T 1475-2006, supports CTC20/2.1, automatically discovers and cooperates with ONUs of different manufacturers.BDCOM P3310B OLT supports the symmetric uplink/downlink 1.25Gbps PON transmission rate, efficient bandwidth usage and Ethernet services, helping carriers to provide reliable services to their users.
Its coupling ratio, 1:64, and its support of different hybrid ONU networks minimize the carrier’s investment.
BDCOM P3310B, based on the edge-cutting technologies, is strong in functions. A few of its functions such as QoS guarantee, SLA and DBA can be easily listed out.
BDCOM P3310B can support four PON systems and has the following advantages:
EPON: P3310B supports IEEE802.3ah and PRC Community Industry Standard (YD/T 1475-2006). It adopts the point-to-multipoint network topology, effectively collects separate Ethernet services and aggregates them on the MAN node. It connects the upper-layer devices through the GE interface and can be connected to the existing network smoothly.
The Dynamic Bandwidth Allocation (DBA) mechanism enables all users to share the 1Gbps bandwidth reasonably, guaranteeing a reliable QoS.
System’s capacity: The modularized PON card of BDCOM P3310B can support four EPON systems simultaneously, up to 256 ONUs and the 1/64 coupling ratio.
Uplink interface: Its flexible design supports various MAN interface type groups. The optical ports or the electrical ports are selected according to network conditions.
৳ 48,000.00৳ 50,500.00 -
BDCOM P3608-2TE-1AC EPOM OLT 8 PORT
BDCOM P3608-2TE-1AC OLT
Maximum coupling ratio, 1:64
128G Backplane Bandwidth
Volume of the MAC table: 32K
Ports 8 EPON ports
8 GE ports (4 GE optical ports and 4 GE TX/SFP ports)
Optional 2 10G ports
EPON A 1Gbps transmission rate with downlink and uplink symmetry
Average emitting power of the PON port: +2dbm to +7dbm
Light reception sensitivity of the PON port: no less than -30dBm
Security: ONU authentication mechanism
Standard IEEE802.3ah
IEEE 802.1D, Spanning Tree
IEEE 802.1Q, VLAN
IEEE 802.1w, RSTP
IEEE 802.3ad, LACP
Ethernet – II
QoS Backpressure flow control (half duplex)
IEEE 802.3x flow control (full duplex)
IEEE 802.1p, CoS
WR, SP and FIFO
ONU-based uplink/downlink rate limit
DBA and SLA
VLAN Port-based VLAN
4K active VLANs
QinQ and flexible QinQ
IP routing Static route, RIPv1/v2, OSPF, etc.
Routing table: 12K
Multicast IGMP v1/2/3
IGMP Snooping
Reliability Unidirectional Link Detection (UDLD)
Optical path protection of EPON
Network security MAC limit
Port isolation
Storm control
Flow-based ACL
Transmission data encryption on the PON interface
Management CLI, SNMP and TELNET
TFTP and FTP
Chassis 442.5mm(W) x300mm(D) x 44mm(H)
Installation: A 19-inch cabinet
Weight: 2kg
Environment Working condition: 0℃-55℃; 10%-85% non-condensing
Storage condition: -40℃-80℃; 5%-95% non-condensing
Power Input voltage: AC90 to 264V，DC -36 to -72V
Dual power inputs, AC/DC power hybrid, power module’s hot swap
Over-current protection and over-voltage protectionOne year Warranty.
৳ 88,000.00৳ 89,500.00 -
DBC 8 PORT OLT EPON
DBC 8 PORT OLT
Product Description
8 Port Optical Line Terminal৳ 83,000.00৳ 85,000.00 -
DBC OLT EPON 4 Port
DBC OLT EPON 4 Port
DBC GEPON OLT is 1U height 19 inch rack mount products. The features of the OLT are small, convenient, flexible, easy to deploy, high performance. It is appropriate to be deployed in compact room environment. The OLTs can be used for “Triple-Play”, VPN, IP Camera, Enterprise LAN and ICT applications.
৳ 44,000.00৳ 47,000.00 -
DBC Optical Power Meter
Photo detector of large sensitive area, which is easy to clean.
Fast conversion and high refresh rate,up to 20Hz.
High sensitivity,up to-70dBm(Type A)and-50dBm(B type).
2pcs of AA battery as power supply.৳ 6,500.00৳ 6,650.00 -
DBC PLC Splitter 1×2
PLC Splitter 1×2 Steel Tube No Connector 0.9mm Cable Diameter Optic Plc Splitter 1260-1610nm
Description
Planar lightwave circuit splitter (PLC Splitter) is a type of optical power management device that is fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON(EPON/GPON) networks to realize optical signal power splitting.
We provides whole series of 1xN and 2xN splitter products that are tailored for specific applications. All PLC Splitter products meet GR-1209-CORE and GR-1221-CORE requirements.
Features
1Low insertion loss and low PDL
2High channel counts
3Exceptional reliability and stability
4Wide operating wavelength
৳ 120.00৳ 130.00 -
DBC PLC Splitter 1×4
PLC Splitter 1×2 Steel Tube No Connector 0.9mm Cable Diameter Optic Plc Splitter 1260-1610nm
Description
Planar lightwave circuit splitter (PLC Splitter) is a type of optical power management device that is fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON(EPON/GPON) networks to realize optical signal power splitting.
We provides whole series of 1xN and 2xN splitter products that are tailored for specific applications. All PLC Splitter products meet GR-1209-CORE and GR-1221-CORE requirements.
Features
1Low insertion loss and low PDL
2High channel counts
3Exceptional reliability and stability
4Wide operating wavelength
৳ 140.00৳ 150.00 -
DBC PLC Splitter 1×8
PLC Splitter 1×2 Steel Tube No Connector 0.9mm Cable Diameter Optic Plc Splitter 1260-1610nm
Description
Planar lightwave circuit splitter (PLC Splitter) is a type of optical power management device that is fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON(EPON/GPON) networks to realize optical signal power splitting.
We provides whole series of 1xN and 2xN splitter products that are tailored for specific applications. All PLC Splitter products meet GR-1209-CORE and GR-1221-CORE requirements.
Features
1Low insertion loss and low PDL
2High channel counts
3Exceptional reliability and stability
4Wide operating wavelength
৳ 170.00৳ 180.00 -
DBC-EDFA 1550nm / 1490nm / 1310nm
DBC-EDFA 1550nm / 1490nm / 1310nm
Description
BC-EDFA optical amplifier adopts reliable, high-quality 980nm and 1480nm pump laser. Upon
special design and exclusive optimization technology, it greatly reduces the signal degradation.
The machine achieves reliable optical amplification through low-noise EDF (Erbium-doped fiber)
and high-efficient circuitry.
Combined with 1550nm optical transmitter, BC-EDFA is widely used in long-distance transmission
among ring network, distribution network and town network.
Features- 1U, 19” standard rack-mount
- World brand laser pumps
- Low noise
- Output power from 13 to 24dBm
- Operational parameters displayed on LCD OF front panel
- Standard RJ45 interfaces; SNMP
৳ 70,000.00৳ 75,000.00 -
HUAWEI 1GE EPON ONU HG8010H
HUAWEI 1GE EPON ONU HG8010H
Description:
HUAWEI 1GE EPON ONU HG8010H is an indoor optical network terminal (ONT) in the Huawei FTTH solution. By using the EPON technology, ultra-broadband access is provided for home and SOHO users. The HG8010H provides one GE/FE auto-adapting Ethernet port. The HG8010 features high-performance forwarding capabilities to ensure an excellent experience with VoIP, Internet, and HD video services.
Plug-and-play: services can be deployed by one click on the NMS, and on-site configuration is not required.
Remote diagnosis: Remote fault locating is implemented by the loop-line test of POTS ports, call emulation and PPPoE dialup emulation initiated by the NMS.
Link monitoring: E2E link detection is achieved using 802.1ag Ethernet OAM.
High speed forwarding: 900 Mbit/s forwarding in the NAT scenario.
IPv6 Capability: support IPv6/IPv4 dual stack and DS-Lite.
Key Features:
Plug and play: Configurations are automatically delivered by the Network Management System so on-site commissioning is not required
Remote diagnosis: POTS ports support loop line tests and call simulation tests, implementing remote fault locating. Supports remote batch upgrades, and up to 2,000 devices can be upgraded each hour
Link monitoring: IEEE 802.1ag-based Ethernet OAM that implements end-to-end (E2E) link detection and network isolation
Energy wise: SOC chips feature high-integration capabilities. Each chip integrates the PON, voice, gateway, and LSW modules, with 25 percent power savings
৳ 850.00৳ 900.00 -
Huawei 4 Port EPON ONU
Huawei 4 Port EPON ONU
Description
The HG8240 is a highly cost-effective high performance optical network terminal (ONT) that delivers ultra-broadband access to home and SOHO users. It is FCC and UL certified with a compact, aesthetic enclosure ideal for indoor applications. Its two POTS and Four ethernet ports can accommodate current and future home applications. The HG8240’s rich feature set makes it the ideal ONT for FTTH deployments – enabling voice, video and data applications at
home.The HG8240 connects home and SOHO users upstream to the network using its optical port, and it connects the four 10M/100M/1000M BASE-T ports downstream to service terminals such as PC, STB, or video phone set. In addition, two POTS ports (TEL 1 and TEL 2) on the HG8240 are for traditional phone sets.
Dimensions: 176 mm W × 138.5 mm D × 28 mm H
Ports 4GE+2POTS
Power consumption
Minimum: 3.0 W
Maximum: 7.0 W
Operating: temperature 0°C to 40°C / 32°F to 104°FOperating: humidity 5% to 95% (non-condensing)
Power supply
Adapter input: 100-240 VAC, 50-60 Hz
System power supply: 11-20 VDC, 1A
Weight About 500g
Installation
mode Wall mount or desk top
Certification FCC,৳ 1,100.00৳ 1,200.00 -
HUAWEI EcoLife HG8010H EPON ONU BIG
HUAWEI 1GE EPON ONU HG8010H
Description:
The EchoLife HG8010H is an indoor optical network terminal (ONT) in Huawei FTTH solution. By using the EPON technology, ultra-broadband access is provided for home and SOHO users. The HG8010H provides one GE/FE auto-adapting Ethernet port. The HG8010 features high-performance forwarding capabilities to ensure excellent experience with VoIP, Internet and HD video services.
Plug-and-play: services can be deployed by one click on the NMS, and on-site configuration is not required.
Remote diagnosis: Remote fault locating is implemented by the loop-line test of POTS ports, call emulation and PPPoE dialup emulation initiated by the NMS.
Link monitoring: E2E link detection is achieved using 802.1ag Ethernet OAM.
High speed forwarding: 900 Mbit/s forwarding in the NAT scenario.
IPv6 Capability: support IPv6/IPv4 dual stack and DS-Lite.
Key Features:
Plug and play: Configurations are automatically delivered by the Network Management System so on-site commissioning is not required
Remote diagnosis: POTS ports support loop line tests and call simulation tests, implementing remote fault locating. Supports remote batch upgrades, and up to 2,000 devices can be upgraded each hour
Link monitoring: IEEE 802.1ag-based Ethernet OAM that implements end-to-end (E2E) link detection and network isolation
Energy wise: SOC chips feature high-integration capabilities. Each chip integrates the PON, voice, gateway, and LSW modules, with 25 percent power savings
৳ 850.00৳ 900.00
