BDCom
-
BDCOM 4PORT EPON OLT P3310D-2AC
BDCOM P3310C-2AC 4 Port OLT Price in Bangladesh.
BDCOM P3310B complies with IEEE802.3ah and P.R.C intercommunication standard, YD/T 1475-2006, supports CTC20/2.1, automatically discovers and cooperates with ONUs of different manufacturers.BDCOM P3310B OLT supports the symmetric uplink/downlink 1.25Gbps PON transmission rate, efficient bandwidth usage and Ethernet services, helping carriers to provide reliable services to their users.
Its coupling ratio, 1:64, and its support of different hybrid ONU networks minimize the carrier’s investment.
BDCOM P3310B, based on the edge-cutting technologies, is strong in functions. A few of its functions such as QoS guarantee, SLA and DBA can be easily listed out.
BDCOM P3310B can support four PON systems and has the following advantages:
EPON: P3310B supports IEEE802.3ah and PRC Community Industry Standard (YD/T 1475-2006). It adopts the point-to-multipoint network topology, effectively collects separate Ethernet services and aggregates them on the MAN node. It connects the upper-layer devices through the GE interface and can be connected to the existing network smoothly.
The Dynamic Bandwidth Allocation (DBA) mechanism enables all users to share the 1Gbps bandwidth reasonably, guaranteeing a reliable QoS.
System’s capacity: The modularized PON card of BDCOM P3310B can support four EPON systems simultaneously, up to 256 ONUs and the 1/64 coupling ratio.
Uplink interface: Its flexible design supports various MAN interface type groups. The optical ports or the electrical ports are selected according to network conditions.
৳ 48,000.00৳ 50,500.00 -
BDCOM P3608-2TE-1AC EPOM OLT 8 PORT
BDCOM P3608-2TE-1AC OLT
Maximum coupling ratio, 1:64
128G Backplane Bandwidth
Volume of the MAC table: 32K
Ports 8 EPON ports
8 GE ports (4 GE optical ports and 4 GE TX/SFP ports)
Optional 2 10G ports
EPON A 1Gbps transmission rate with downlink and uplink symmetry
Average emitting power of the PON port: +2dbm to +7dbm
Light reception sensitivity of the PON port: no less than -30dBm
Security: ONU authentication mechanism
Standard IEEE802.3ah
IEEE 802.1D, Spanning Tree
IEEE 802.1Q, VLAN
IEEE 802.1w, RSTP
IEEE 802.3ad, LACP
Ethernet – II
QoS Backpressure flow control (half duplex)
IEEE 802.3x flow control (full duplex)
IEEE 802.1p, CoS
WR, SP and FIFO
ONU-based uplink/downlink rate limit
DBA and SLA
VLAN Port-based VLAN
4K active VLANs
QinQ and flexible QinQ
IP routing Static route, RIPv1/v2, OSPF, etc.
Routing table: 12K
Multicast IGMP v1/2/3
IGMP Snooping
Reliability Unidirectional Link Detection (UDLD)
Optical path protection of EPON
Network security MAC limit
Port isolation
Storm control
Flow-based ACL
Transmission data encryption on the PON interface
Management CLI, SNMP and TELNET
TFTP and FTP
Chassis 442.5mm(W) x300mm(D) x 44mm(H)
Installation: A 19-inch cabinet
Weight: 2kg
Environment Working condition: 0℃-55℃; 10%-85% non-condensing
Storage condition: -40℃-80℃; 5%-95% non-condensing
Power Input voltage: AC90 to 264V，DC -36 to -72V
Dual power inputs, AC/DC power hybrid, power module’s hot swap
Over-current protection and over-voltage protectionOne year Warranty.
৳ 88,000.00৳ 89,500.00 -
Corelink 4 Port EPON OLTÂ
Corelink 4 Port EPON OLT
Description
Core Link 4 Port OLT, 4 Pon OLT with Combo uplink Single power Supply 4 SFP PON ports, 2x1000M SFP ports, 2xCombo uplink ports Each PON port support 1.64 split ratio, total 256 ONUs access
The distance can reach 20kmSupport to work with any epon ONUs to establish passive network
Support WEB and SNMP, integrate switching function 1U rack design, inside fan, better for heat dissipating and reliability operating
Apply for town,village fiber network and surveillance, apply for FTTX network, to transmit IP phone, data,IPTV and other IP services access
Singla power supply
1-year warranty.৳ 29,000.00৳ 30,000.00 -
Corelink CW8P2P 8 Port GEPON OLT
Corelink CW8P2P 8 Port GEPON OLT
Description
Core-Link 8 SFP PON ports with combo SFP / Ethernet uplink ports, each PON port support 1.64 split ratio, total 512 ONU access, up to 20KM distance, easy to use, support WEB management and SNMP, 1U rack design, inside fan, dual power, -32 dBm receiving sensitivity.
৳ 55,000.00৳ 58,000.00 -
Shinho A3 Splicer
Shinho A3 Splicer
Features:
High precision PASÂ alignment system
*Splicing time 6 sec., heating time 30Â sec.
*Fast boot technology
*More than 240 times splicing and heating
*Resist dust, rain, wind, and shock
*Fiber type identify, AUTO splicing mode
*Easy to change electrodes and fiber holder
*High speed USB, maintenance via the Internet
৳ 80,000.00৳ 90,000.00 -
SHINHO Fusion Splicer X-97
SHINHO Fusion Splicer X-97
- Handheld, Small, Light
- Industrial standard screen
- Core to core digital alignment
- 8s splicing stime, 26s tube heating time
- 5800mAh and pluggable Li-battery, Typical 200 cycles
- ARC calibrated by temperature and air pressure automatically
৳ 82,000.00৳ 90,000.00 -
SHINHO Fusion Splicer X-97
SHINHO Fusion Splicer X-97
- Handheld, Small, Light
- Industrial standard screen
- Core to core digital alignment
- 8s splicing stime, 26s tube heating time
- 5800mAh and pluggable Li-battery, Typical 200 cycles
- ARC calibrated by temperature and air pressure automatically
৳ 82,500.00৳ 90,000.00 -
Shinho X-800 Fusion Splice
*6s typically for splicing and 26s for heating,
*Fiber core max. magnifications up to 250X,
*Electrodes discharging more than 4000 times,
*Integrated heater,easy and convenient to operate,
*USB port for software updating and data records exporting,
*PAS image digital processing system, core to core alignment,
*ARC calibrated by temperature and air pressure automatically,
*360° rubber armor protects machine from shock, water and dust,
*5800mAh and pluggable Li-battery,typical 200 cycles splicing and heating,
*Multi-function holder clamps, suitable for bare fibers, drop cables, patch cords etc.X-800 Fusion Splcier Data Sheet
Applicable fiber SM(G.652), MM(G.651), DS(G.653), NZDS(G.655), others(including G.657)
Fiber count Single
Applicable fiber dimensions Cladding diameter: 80 -150μm, Coating diameter: 160 -900μm
Typical splice loss 0.02dB(SM), 0.01dB(MM), 0.04dB(DS), 0.04dB(NZDS)
Return loss >60db
Fiber cleaved length 10-16mm (coating diameter< 250μm ), 16mm(coating diameter: 250-1000μm )
Splicing program 40 groups
Operate mode Manual, Automatic
Auto-heating Available
Typical splicing time 8 seconds
Tube heating time 26 seconds for 60mm and 40mm shrinkable sleeves
Fiber view magnification 250X(X or Y view), 125X(X and Y view)
Viewing method and display 2 CMOS cameras, 4.3 inch color LCD monitor
Storage of splice result 4000 results
Loss evaluation Available
Tension test 1.8-2.2N
Interface GUI menu interface, easier operation
Battery capacity 5800mAh, typical 180 cycles(splice and tube heat), pluggable inner Li-battery
Power supply Adaptor, input: AC100-240V(50/60HZ)
Electrode life More than 4000 ARC discharges, can be replaced conveniently
Terminals USB 2.0 port, for uploading splice results and upgrading software
Operating condition Altitude: 0-5000m, Humidity: 0-95%, Temperature: -10ºC~+50ºC;Wind speed: max 15m/s
Dimension 149mm(L)x120mm(W)x127mm(H)
Weight 1.9kg including battery৳ 95,000.00৳ 100,000.00 -
SHINHO X-86 SPLICE MACHINE
SHINHO X-86 SPLICE MACHINE
Metro style GUI, easy operation;
High definition 5.7′ colorful LCD;
USB port for software upgrading;
8s typically for splicing and 28s for heating;
Up to 4000 groups of records can be stored;
PAS technology, core to core digital alignment;
Intelligent operation, auto heating and splicing;
Rubber armor protects machine from shock or impact;
8800mAh and removable Li-battery, Typical 250 cycles;
Various display groups, max. Magnifications up to 300X;
ARC calibrated by temperature and air pressure automatically;
৳ 135,000.00৳ 140,000.00 -
SHINHO X-86H SPLICE MACHINE
SHINHO X-86H SPLICE MACHINE
Applicable fiber SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T
G.655), others(including G.657)Cladding diameter 80 -150μm
Coating diameter 160 – 900μm
Typical splice loss SM 0.02dB, MM 0.01dB, DS 0.04dB, NZDS 0.04dB
Return loss <60dB
Cleaved length 10~16mm ( Diameter of coating < 250μm ) ; 16mm ( Diameter of coating
250~1000μm )Splicing program 40 groups
Operate mode Manual, Automatic
Auto-Heat Available
Typical splicing time 8 seconds
Heating time 26 seconds for 60mm, 40mm shrinkable sleeve
Magnification 300 times for single display, 150 times for double display
Photoelectric system Two high sensitive cameras, 5.7′ 640×480 colorful LCD
Splicing data record Storing up to 4000 groups of records
Loss evaluation Available
Tension test 1.8~2.2N
Interface GUI menu interface, easy operation
Battery capacity 5800mAh, 250 times fusion and heating, pluggable, real-time power monitor
Power supply Adaptor, input: AC 100-240V ( 50/60HZ ) , output: DC 11~13.5V
Electrodes lifetime More than 4000 times splicing, electrodes can be replaced conveniently
External port USB2.0 port, used to derive splicing record data, software upgrade
Operate environment Altitude: 0~5000m; Relative humidity: 0~95%; Temperature: -10ºC~+50ºC;
Wind speed: max 15m/sVolume/Weight 160mm(L)×150mm(W)×145mm(H) / 2.75kg (including battery)
৳ 140,000.00৳ 145,000.00 -
Shinho X-900 Fiber Splicer
Shinho X-900 Fiber Splicer
6 motors accurate core to core alignment, can detect automatic fiber, 6-second stable splicing and 18-second fast heating, automatic & real-time ARC calibration. The exact time of heating can be observed in temperature, GUI menu interface, 5200mAh Li-battery, 2 CMOS cameras, 5.0-inch color LCD monitor, anti-shock and anti-dust and waterproof, apply to bare fibers / drop cables and patch cords, 160 x 136 x 140mm dimension.
৳ 120,000.00৳ 125,000.00 -
ZTE F401 1GE EPON
ZTE F401 1GE EPON
Features:
F401Â is a EPON Optical Network Terminal designed for FTTH. It provides high-performance forwarding capabilities to ensure excellent experience with Internet and HD video services. It has a small, smart appearance and green, energy-saving advantage.
Specification:
Standards:
- IEEE 802.3ah, IEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ad, IEEE 802.1P, IEEE 802.3x
Network interfaces:
- EPON Interface: 1 * EPON Interface (SC/PC)
- Transmission rate: 1.25Gbps upstream and downstream
User interface:
- LAN: 1 x 10/100/1000 Base-T adaptive interface
Features:
- 1000BASE-PX20+ optical Interface
- MPCP (Muti-Point Control Protocol)
- OAM and extended OAM
- DBA (Dynamically Bandwidth Assignment)
- MAC address/LOID (Logical ONU Identifier) authentication
- IGMP snooping and controllable multicast
- Loop back detection
- Dying Gasp alarm
- SIP, H.248 and MGCP
- G.711/G.723.1/G.729A and T.30/T.38
- Local WEB management, Remote TR069 and OAM management
Physical and environmental specifications:
- Power Consumption: <4W
- Power Supply: 12V DC
- Operating Temperature: -5 ~ 45°C
- Humidity: 5 ~ 95% relative humidity
- Dimensions: (W*H*D) 130mm*40mm*103mm
- Net Weight: 0.2kg
- Installation: Network cabinetall-mounting/desktop
৳ 850.00৳ 900.00
